Welcome Customer !

Membership

Sinomeasure Automation Technology Co,Ltd
Free Member ·1YRS
,
Other

Main Products: 流量仪表

Xwboo>Products
Product Categories

Sinomeasure Automation Technology Co,LtdFree·1YRS

  • E-mail

    sales01 @sinomeasure.com

  • Phone

    +86-18757554945

  • Address

    5th floor, Building 4, Singapore-Hangzhou Science & Technology Park, Hangzhou, China

Contact Now

SIN-RD902S radar level meter for high temp and pressure application

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
Category: Radar level meter Views: 394 Applications: SIN-RD902S Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications - be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.
Product Details
Product Radar level meter
ModelSIN-RD902S
Measure range0-30 meters
ApplicationHigh temperature, high pressure and corrosive medium
Process ConnectionThread, Flange
Medium Temperature-40℃~130℃(Standard type), -40℃~250℃(High temp type)
Process Pressure -0.1~4.0MPa
Accuracy±3mm
Protection GradeIP67
Frequency Range26GHz
Signal Output4-20mA
RS485/Modbus
Power supplyDC(6~24V)/ Four-wire
DC 24V / Two-wire


Introduction


SIN-RD902S Non-contact radar with simple commissioning, trouble-free operation saves time and money. PTFE sensor material, for usage in a wide range of applications - be it in simple storage tanks, in corrosive or aggressive media or high accuracy tank gauging applications.


Installation guide


Be installed in the diameter of the 1/4 or 1/6.

Note: The minimum distance from the tank

wall should be 200mm.


Note: ① datum

②The container center or axis of symmetry

The top conical tank level, can be installed at

the top of the tank is intermediate, can guarantee

the measurement to the conical bottom

A feed antenna to the vertical alignment surface.

If the surface is rough, stack angle must be used

to adjust the angle of cardan flange of the antenna

to the alignment surface.


(Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)