Welcome Customer !

Membership

OPTEX FA CO., LTD.
Free Member ·1YRS
,
Other

Main Products: 传感器

Xwboo>Products

OPTEX FA CO., LTD.Free·1YRS

  • E-mail

  • Phone

    +81-77-527-9860

  • Address

    4-7-5, Nionohama Otsu, Shiga 520-0801, Japan

Contact Now

M18 Cylindrical SensorsC-R Series

Model
Nature of the Manufacturer
Other
Product Category
Amplifier Built-in Type
Place of Origin
City, Province
Overview
Best-in-class robust and powerfulLarge sensing distance Full-metal housing in brass Easy to Align even the long distance
Product Details

New C-R Series

Cylindrical photoelectric sensor with long-distancedetection, robustness, and excellent usability.

The new C-R Series has much higher performance than conventionalmodels, and is more easy-to-use.
This is a new generation photoelectric sensor with the high detectionperformance, cost performance ratio, and robustness that arerequired of cylindrical sensors.

Large Sensing Distance

Achieved 25m detection distance, the longest for through beam types!Meets the need for long-distance application.

 Hotmelt molding

  • High vibration resistance

    Hotmelt molding enables high vibration resistance up to100Hz, 8 hours. (For details, see Specification)

  • Watertight:IP67

    The C-R Series meets the conditions for the watertightIP67 rating.
    Can be used on work sites or devices that are exposed tosplashing water such as the food and beverage industry.

Full-metal Housing in Brass

  • Robust design

    In the conventional model, the tip and the end of thehousing were made of plastic.
    New C-R Series achieved the high robustness byfull-metal housing.

Easy to Align even the long distance

  • Visible red LED

    Red LED, which allows easyalignment, has been adoptedfor all models as the lightsource. The spot beam locationis visible, reducing the timerequired for alignment.
    In addition, spot beam flare is minimized, which improvesthe visibility when compared to conventional models.

  • Front Output Indicator is equipped on the receiver (Through beam type)

    Output indicator is equipped not only on the side of thereceiver, but also on the front. When panning the emitterfor alignment, the ON/OFF state of the indicator is visiblefrom the emitter side, so alignment can be performedmore easily by a single operator.