Welcome Customer !

Membership

Wenzhou Yibaiyi Electromechanical Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 测试仪器

Xwboo>Products

Wenzhou Yibaiyi Electromechanical Equipment Co., Ltd.Free·1YRS

  • E-mail

    1762752588@qq.com

  • Phone

    0577-57151533

  • Address

    Zhiguang Industrial Zone, Liushi, Wenzhou

Contact Now

Infrared spirit level

Model
Nature of the Manufacturer
Other
Product Category
Measuring Instrument Series
Place of Origin
City, Province
Overview
Infrared spirit level
Product Details

Product description: Digital display level, LCD display; resolution 0.05 °; aluminum alloy body; level bubble; slope display; absolute / relative measurement; optional: magnetic sheet on the bottom / special angle prompt tone / laser function

1. Overall dimensions (mm) length * width * thickness: 6": 172.4 * 57.5 * 26/9": 248.6 * 57.5 * 26 /12":324.8*57.5*262/24":629.6*57.5*26/ 40": 1016 * 57.5 * 26

2.Function / parameter

1) Range: 4x90 °

2). Resolution: 0.05 °; Accuracy: 0.2 °

3) Button: Touch button / Five button: ON / OFF-ZERO-HOLD-TILT% -Buzzer (Laser)

3. Power

1) Operating voltage: DC 7.5 ~ 9V

2) Working current: shutdown state: ≤10uA

Power-on state: ≤12mA

3) Auto power off function: Yes

4. Function key description

ON / OFF: Press once to turn on the power, then press again to turn off the power

Bevel: Clear"0.00 °" anywhere

Hold: Short press once to display the digital lock, and short press again to display the digital lock release

TILT%: short press once to switch to slope measurement mode, short press again to switch to normal measurement mode

Buzzer (Laser): short press once to enter special angle alarm (laser function) mode

Correction function: On the water platform surface, press the ON / OFF & ZERO key at the same time for about 5 seconds, CAD1 appears, keep still, wait for the"1" after the CAD number to flash (this process takes about 8 seconds), turn the body clockwise to the other side , Press ZERO, and then repeat the above action until CAD5 appears, press ZERO to display 0.00, the calibration is complete