Welcome Customer !

Membership

Henan Senyuan Electric Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 电气设备

Xwboo>Products

XGN2-12 Cubicle Fixed Metal-enclosed Switchgear

Model
Nature of the Manufacturer
Other
Product Category
Medium Voltage Switchgear
Place of Origin
City, Province
Overview
XGN2-12 Cubicle Fixed Metal-enclosed Switchgear
Product Details

Product Introduction

XGN2-12 cubicle fixed metal-enclosed switchgear (hereinafter referred to as switchgear) is used in three-phase AC 50Hz system with rated voltage of 3.6KV, 7.2KV and 12KV for receiving and distributing electric power. The switchgear is particularly suitable for indoor occasions of frequent operation. Its busbar system is single busbar, from which the single busbar with bypass and double busbar structure are derived.

The switchgear complies with the national standards, such as GB 3906 “3.6~40.5KV AC Metal-enclosed Switchgear and Control Equipment" and DL 404-1997 “Ordering Technical Requirements for Indoor AC HV Switchgear".


Product Features

1. Its housing is assembled with C-shaped steel, and the cabinet is divided into four parts, namely main busbar compartment, instrument compartment, circuit breaker compartment and cable compartment. Those compartments are separated by metal partitions.

2. The master switch uses ZN28-12 or VS1-12 series vacuum circuit breaker(VCB), and disconnector adopts GN30S-12 or GN22-12 series VCB. The transformer is fully insulated with higher safety margin.

3. The switchgear has reliable five-anti interlocking device.


Technical Parameters

Item Unit Parameter
Rated Voltage KV 3.6、 7.2、 12
Rated Current A 630、1250、1600、2000、2500、3150、4000
Rated Breaking Current KA 20 25 31.5 40 50
Rated Short-time Withstand Current KA 20 25 31.5 40 50
Rated Peak Withstand Current KA 50 63 80 100 125
Rated Making Current KA 50 63 80 100 125
Thermal Stable Time S 4
Protection Degree IP2X
Busbar System Single Busbar/Single Busbar Section
Operating Mode of Circuit Breaker Spring-storing Type
Overall Dimensions Width×Depth
(Cable Incoming and Outgoing in the Bottom)
mm 1100×1200(1250A or below)
1200×1200(1250A and above)
Overall Dimensions Width×Depth
(Inlet &Outlet Line of Busbar)
1100×1600(1250A or below)
1200×1900(1250A and above)
Weight Kg About 1000