Watch automatic assembly test line
1. Product description:
This equipment is a fully automatic line body, which uses a carrier as a reference carrier. The assembly line transports the carrier through the entire line body. It uses a six-axis manipulator and a three-axis module for automatic loading and unloading and automatic NG splitting, and realizes the full return of the carrier Automatic line body.
2. Equipment application and industry:
This device is a fully automatic function detection line for watches, suitable for the function detection of 0.8-inch to 1.8-inch watches and other similar products.
3. Equipment advantages:
● Automatic loading and unloading, automatic NG splitting, automatic carrier reflow;
● Automatically connect to the mini system, automatically track the information of each product and upload it to the mes system;
● High productivity, high efficiency and stable quality;
● Greatly reduce labor costs and low equipment maintenance costs;
● Improve production yield and reduce loss rate.
4. Technical parameters
1. General range of steel sheet
| 0.8 inch to 1.8 inch watch products
|
2. Model
| Dwin-Watch testing-08A
|
3. Yield
| ≥ 99.8% (dust spot washing rate above 1um)
|
4. UPH
| 700PCS/H
|
5. Compressed air flowmeter
| 2000L/min(0.4-0.6Mpa)
|
6. Equipment cleanliness level
| Grade 1000
|
7. Height of operation table
| 800±50MM
|
8. Machine Dimensions
| L100000mm * W2300mm *H2200mm
|
9. Air source specification
| >0.5MPa (Clean, without oil and water)
|
10. Power specifications
| AC220V
|
5. product pictuer

100#Watch automatic assembly test line
200#Watch automatic assembly test line
300#Watch automatic assembly test line
400#Watch automatic assembly test line
500#Watch automatic assembly test line
600#Watch automatic assembly test line
700#Watch automatic assembly test line