Welcome Customer !

Membership

Hefei Yi Boluo Industrial Equipment Co., ltd.
Free Member ·1YRS
,
Other

Main Products: 阀门及配件

Xwboo>Products

Hefei Yi Boluo Industrial Equipment Co., ltd.Free·1YRS

  • E-mail

    hefeiyiboluo@163.com

  • Phone

    0551-63710328

  • Address

    No.48-3-3 East, Tianmen Road, economic development zone, Hefei City, Anhui Province

Contact Now

Pneumatic flange hard seal butterfly valve

Model
Nature of the Manufacturer
Other
Product Category
butterfly valve
Place of Origin
City, Province
Overview
Pneumatic flange hard seal butterfly valve
Product Details
  • Pneumatic flange hard seal butterfly valve





      Pneumatic hard seal pair butterfly valve


      Product model: D643H


      Nominal diameter: DN50~DN1200


      Nominal pressure: 1.0MPa~1.6MPa


      Connection method: clip type


      Material: WCB, stainless steel


      Applicable temperature: -40~+425°C


      Applicable medium: gas, water oil, etc. (high temperature occasion)


      Pneumatic actuator: double acting, single acting


      Uses: Used to cut or adjust various corrosive and non-corrosive media


      Pneumatic hard seal pair butterfly valve product overview


      The pneumatic hard sealing butterfly valve adopts a three-dimensional eccentric structure, and the butterfly plate is a soft and hard laminated metal sheet, which has the double advantages of a metal hard seal and an elastic seal. It has a two-way sealing function, is not limited by the flow direction of the medium during installation, and is not affected by the position of the space, and can be installed in any direction. Pneumatic hard seal butterfly valves are widely used in metallurgical, electric power, petroleum, chemical and other industrial pipelines with medium temperature ≤ 425 °C to regulate flow and cut off fluids.


      Pneumatic hard seal pair butterfly valve features


      1, metal seal can be applied to media with a little particles, slurry


      2, the applicable temperature can reach 425 ° C


      3, almost no friction when sealing, to ensure less torque, better sealing


      4, flange to the pinhole connection for a variety of standards


      Pneumatic hard seal pair butterfly valve actuator


      The new series of GT-type pneumatic actuators are double-acting and single-acting (spring-return), gear transmission, safe and reliable; large-diameter valves adopt series AW pneumatic actuator fork-type transmission, with reasonable structure and large output torque. There are double acting and single acting.


      1. Gear type double piston, large output torque and small volume.


      2. The cylinder is made of aluminum and gold materials, which is light in weight and beautiful in appearance.


      3. Manual operation mechanism can be installed at the top and bottom.


      4. The rack-and-pinion connection can adjust the opening angle and rated flow.


      5. The actuator can be equipped with electric signal feedback indication and various accessories for automatic operation.


      6, IS05211 standard connection provides convenience for the installation and replacement of the product.


      7. The joint screws adjusted at both ends can make the standard product have an adjustable range of ±4° at 0° and 90°. Ensure synchronization with the valve.


      Pneumatic hard seal pair butterfly valve technical parameters and performance




    GTD/ATDTechnical parameters of pneumatic actuators

    Pneumatic seal butterfly valve parameters

    Types of

    Double-acting piston, spring return

    Nominal diameter

    DN50~400mm

    Air pressure

    Double acting:2-8bar/Single acting:4-8bar

    Nominal

    PN1.6、2.5MPa

    Output torque

    Double acting:4N·M~10560N·M

    Valve shaft material

    Carbon steel、304/316/316Lstainless steel

    Single acting:N·M~2668N·M

    Body material

    Carbon steel, alloy steel, stainless steel

    Operating temperature

    Normal temperature: -20 ℃ ~ 80 ℃ (nitrile rubber O-rings)

    Stem material

    Carbon steel, alloy steel, stainless steel

    High temperature: -20 ℃ ~ 160 ℃ (Viton O-ring)

    Seating

    stainless steel

    Range of motion

    0~90°±5°

    structure type

    Three-dimensional eccentric

    Connection thread

    GTD40~GTD83/ATD50~ATD88    G1/8″

    temperature

    ≤425℃

    GTD110~GTD350/ATD100~200   G1/4″

    Applicable medium

    Water, air, natural gas, oil and weak corrosive fluid

    Valve position signal

    Locator: 4 ~ 20mA / reply is: fully open fully closed signal

    Feature

    Zero leakage, long life, easy to install, high temperature high pressure





    Nominal diameter(mm)

    Size(mm)

    L

    L1

    H

    1.6Mpa

    2.5Mpa

    D1

    4-Φd

    D1

    4-Φd

    50

    43

    108

    245

    125

    4-18

    125

    4-18

    65

    46

    112

    250

    145

    4-18

    145

    4-18

    80

    46

    114

    350

    160

    4-18

    160

    4-18

    100

    52

    127

    380

    180

    4-18

    190

    4-22

    125

    56

    140

    410

    210

    4-18

    220

    4-26

    150

    56

    140

    490

    240

    4-22

    250

    4-26

    200

    60

    152

    560

    295

    4-22

    310

    4-26

    250

    68

    165

    621

    355

    4-26

    370

    4-30

    300

    78

    178

    680

    410

    4-26

    430

    4-30

    350

    78

    190

    757

    470

    4-26

    490

    4-33

    400

    102

    216

    825

    525

    4-30

    550

    4-36

    450

    114

    222

    925

    585

    4-30

    600

    4-36

    500

    127

    229

    1010

    650

    4-33

    660

    4-36

    600

    154

    267

    1180

    770

    4-36

    770

    4-39