Welcome Customer !

Membership

Hangzhou Denghua Plastic Machine Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 塑料机械

Xwboo>Products

Hangzhou Denghua Plastic Machine Co., Ltd.Free·1YRS

  • E-mail

    sales@denghua-sj.com

  • Phone

    0086-571-63209768

  • Address

    Nansi Economic Decelopment Zone,Xindeng, Fuyang,Hangzhou,Zhejiang Province ,China

Contact Now

Drying room with auto cycle heating and dehumidifying system

Model
Nature of the Manufacturer
Other
Product Category
Lost Foam Casting Machine
Place of Origin
City, Province
Overview
Drying room with auto cycle heating and dehumidifying system
Product Details

Product Description

■The drying room applies both steam and electricity, fully rational use of resources;

■Cyclic heating can reduce the consumption of steam, to achieve save energy and cost, at the same time improve the temperature uniformity and sustainable utilization;

■The temperature control system adopts digital display, which is intuitive and eye-catching, it can effectively maintain temperature stability and has strong safety performance;

■ The room applies steam automaticrecycling system, achievestable temperature and low humidity.

Technical data

1. The drying room is arranged according to the hot air blowing and suction type;

2. Energy: steam and electricity;

3. Humidity can be reduced to ≤ 15%

4. The drying temperature: 45 - 55 ℃;

5. Environment requirements of the drying room : the wind speed, temperature and humidity are uniform,in a slightly negative pressure state.

 

The Lost Foam Casting Production Line

GENERAL DESCRIPTION:

Lost Foam Casting technique (LFC) is known by different generic and propriety names like Lost Foam, Evaporative Pattern Casting, Evaporative Foam Casting, Full Mold, etc. Lost Foam Casting is a type of metal casting process that uses expendable foam patterns to produce castings. Expanded polystyrene foam is used which melts when molten metal is poured into the mold.

 

THE MOST IMPORTANT PROCEDURAL STEPS  ARE EXPLAINED BELOW:

Pre-expander ---- Molding ---- Assembly ---- Coating ---- Mold filling ---- Casting ---- Demolding----Sand processing

 

 

MAIN PROCESSING AREA:

LFC process mainly consists of white area, yellow area, black area and sand process system.

1.The white area of LFC process is to use EPS, STMMA, EPMMA and other foam molding materials to make foam molding white mold through pre-expander, aging, molding, cutting and bonding.

2.In the yellow area of LFC process, white mold clusters are mainly coated with special paint and dried in the drying room.

3.The black area of LFC process uses molten iron to replace the white mold and form the casting part, which includes three steps: vibration modeling, casting replacement.

4.The sand process system is used for cooling, slag removal and dust removal of used dry sand by turning the box after the solid casting. After sand treatment, molding sand can be recycled, reducing production costs.

 

MAIN EQUIPMENTS IN LOST FOAM CASTING PROCESS:

-White Area: Pre-expander machine, Aging Silos, Molding machine, Drying room, Cutting table, Assembly table ,etc.

- Yellow Area: Coating mixer, Electric drying heater, Steam drying heater, Dehumidifier, Detachable cart,etc.

- Black Area: Flask, Turnover box machine, Vibration table, Sandbox roller, Distributor, negative pressure system ,etc.

- Sand Process System: Shakeout grate, Dust cover, Vibrating sieving conveyor, Chain elevator, Cooling equipment, Belt elevator, Sand temperature regulator, Bunker, Dust remover, etc.

 

APPLICATION:

Lost foam casting is used mostly for automotive applications. Cast iron, aluminum alloys, steels, nickel and in some cases stainless steel and copper alloys are cast in this process. The flexibility of LFC is useful in making complicated casting assemblies for automotive parts like cylinder heads, weldment, etc. 

 

Packaging & Shipping

 

Packing : Standard export packaging or  Customer's demands 

Shipping : By sea or Multimodal transport