Falling film evaporator is divided into single effect, double effect, three effect to eight effect evaporator, suitable for milk, glucose, starch, xylose, pharmaceutical, chemical, biological engineering, environmental protection engineering, waste liquid recovery and other industries for evaporation and concentration It is especially suitable for materials that are not easy to scale and evaporate or have strong heat sensitivity. It can be combined with plate type, tube type and plate tube, and MVR and TVR energy-saving technical devices can be designed.
The system consists of various effect heaters, various effect separators, condensers, heat pressure pumps, vacuum systems and drainage systems, each effect material liquid, delivery pumps, operation platforms, electrical instrument control cabinets, valves, pipelines and other systems.
main feature:
a. The complete system design is reasonable and beautiful, stable operation, high efficiency and energy saving, low steam consumption, relatively small pump flow, low installed power and low power consumption.
b. Large concentration ratio, falling film evaporation makes the material liquid with higher viscosity easy to flow and evaporate, and the concentration time is short.
c. The evaporation temperature is low, and the material liquid is heated moderately, which is suitable for the concentration of heat-sensitive materials.
Falling film evaporator parameters
| Modle | Single effect JM1-XX | Double effect JM2-XX | Three effects JM3-XX | Four effects JM4-XX | Five effects JM5-XX |
Water evaporation t / h | 0.5-5 | 1.0-10 | 1-20 | 5-20 | 5-180 |
Feed concentration% | Depending on different materials |
Discharge concentration% | Depending on different materials |
Use steam pressure Mpa | 0.05-0.1 | 0.6-0.8 |
Steam consumption kg / kg evaporation | 1.13 | 0.48-0.57 | 0.33-0.45 | 0.3-0.35 | 0.23 |
Evaporating temperature ℃ | 48-110 |
Circulating cooling water consumption T / T evaporation amount | 56 | 18-28 | 14-18 | 10-12 |