Welcome Customer !

Membership

Wuhan Huatian Electric Power Automation CO., LTD
Free Member ·1YRS
,
Other

Main Products: 电力试验设备

Xwboo>Products

HTJF-9003 Ultrasonic partial discharge detector

Model
Nature of the Manufacturer
Other
Product Category
Two、Partial discharge test equipment
Place of Origin
City, Province
Overview
The instrument can be installed and tested under the running state of the equipmentHigh speed AD conversion circuit is used to digitize the signalThe reliability of detection data is guaranteed by digital signal processing, adaptive filtering and other interference signal processing methods
Product Details

Product Introduction

Portable multifunctional partial discharge tester is our company's technical personnel according to many years of local discharge testing experience, suitable for high voltage equipment partial discharge online detection and location.

The system is equipped with composite TEV sensor, uhf sensor, hf current transformer and high sensitivity ultrasonic sensor to collect partial discharge signals inside the high-pressure equipment. The system adopts multi-stage detection and frequency reduction technology to reduce the frequency of discharge signal, and USES high-speed AD conversion circuit to digitize the signal, and ensures the reliability of detection data through digital signal processing, adaptive filtering and other interference signal processing methods. By collecting different signals generated by partial discharge in different high voltage equipment, the running state of the equipment can be quickly charged. The instrument can be installed and tested under the running state of the equipment, without any influence on the normal operation of the equipment. It is convenient for the staff to timely evaluate the running state of the switch cabinet, and greatly improves the reliability, safety and effectiveness of the equipment running.

The portable multifunctional partial discharge tester consists of the main tester, TEV sensor, ultrasonic sensor, hf current transformer, uhf sensor and connecting wire.

Product Names:partial discharge detector、ultrasonic partial discharge detector

Product Parameters

TEV measurement

Sensorcapacitive
Measuring range0 ~ 60dBmV
Resolution ratio1dB
Error± 1dB
Detection bandwidth5 ~ 70MHz
Maximum pulse/period655
Threshold adjustment range3 ~ 57dB

High-frequency current transformer

Detection frequency band10kHz ~ 30MHz
Signal transmission mode50 Ω coaxial cable
Detection sensitivity10pC

Ultrasonic transducer

Measuring range-7dBμV ~ 68dBμV
Resolution ratio1dB
Error± 1dB
Sensor sensitivity- 65dB (0dB = 1volt/μbar RMS SPL)
Sensor center frequency 20 ~ 50kHz
Sensor diameterno greater than 50 mm
Heterodyne frequency 38.4kHz

Uhf sensor

Detection frequency band300MHz ~ 1.5GHz
Signal transmission mode50 Ω coaxial cable
Detection sensitivity1dB
Gain> 65dbm

Using the environment

Altitude≤ 3000m
Environment temperature-20 ~ 60℃
Relative humidity≤ 95%

Hardware requirements

Shellwith a protective case, the protection grade should be up to or better than IP53
Connectorheadphone jack, low voltage dc charger input, external ultrasonic sensor input
Weight > 3 kg
DisplayLED display, and can display battery status
Note:

1. The appearance of the product shall be subject to the actual product, Technical parameters and model are subject to change without notice. In case of misappropriation or copying, legal liability will be investigated.

2. For more information about huatian products, please enter product center .Service :qiao@hvtest.cc

Product Characteristics

  • 1. The system adopts multi-stage detection and frequency reduction technology to reduce the frequency of discharge signal. Meanwhile, high-speed AD conversion circuit is adopted to complete the digitization of the signal.

  • 2. By collecting different signals generated by partial discharge in different high-pressure equipment, the running state of the equipment can be quickly charged.

  • 3. The instrument can be installed and tested under the running state of the equipment without any influence on the normal operation of the equipment.