Pos | Description |
1 | Extruder |
| Vacuum loading system brand: Shini TAIWAN |
Brand of screw barrel: Golden conch |
Dia. of screw: Φ130mm |
L/D of screw: 33:1 |
Screw material: Nitride 38GrMoAl |
Max. rotation of screw: 115r/min |
Max. extrusion: 650kg/h (Depending upon tape characteristics and material) |
Barrel heating use aluminum heater, solid relay control the heating |
Barrel heating total power and heating zones: 52.5KW 7zones |
Die-head using built-in stainless steel heating pipe and solid-state relay |
T-die brand: Jing cheng |
Length of die-head:1600mm |
Effective length:1500mm |
Exceed film thickness: 0.07-0.35mm Die-head total heating power and heating zones: 18kw 6zones |
Melt pump brand: Maag 15kw |
Siemens AC motor |
Main motor: Siemens AC motor |
Motor power: 160kw |
Screen change method: Auto-belt change screen (Double-net) |
|
1 | Cooling water tank |
| Material: stainless steel |
The tank up and down adjustable |
Manual up and down adjust by chain wheel |
|
1 | Haul-offunit |
| Water remove plate 2sets |
Water snap system 1set motor power 3kw |
Film lifting system 1set motor power 4kw |
Water absorb system 2sets |
Water absorb motor power 3kw. |
|
1 | Slitting system |
| Slitting shaft type: 6 side blade rotate |
Specification: non-stop changing blade, can be adjusted up &down, and right &left. |
|
1 | Drawing unit |
| Roller external dia.: 420mm |
Roller surface treatment:hard chromium plating, glazing Treatment |
Draw unit Motor power: 7.5kw |
Max. Line speed: 80m/min |
|
1 | Edge-film crushing recycling system |
| For direct return of narrow edge trims of non-stretched film into the extruder, consisting of a shredding mill with blower, piping, and air separator |
Shredding mill motor 2.2kw |
Blower motor 2.2kw |
Blower speed 2840rpm |
Rotate blade speed 1430rpm |
Crushing capacity 20kg/h |
|
1 | Double-lay stretching hot air oven |
| Oven length: 6000mm |
Oven width: 1800mm |
Effective using width: 1650mm Heating power: 80kw |
Max. air speed: 10-20m/s |
Motor:Siemens |
Fan power: 7.5kwx2sets |
Fan rotation speed: 1440r/min |
Up oven pneumatic open |
Heating using built-in heating pipe and power regulator |
|
1 | 8 roller stretching unit |
| Roller size: Φ420mm (Bearing SKF) |
Roller surface deal: Plate Cr, mirror deal (Equip safety cover) |
Stretching 4 roller power : 18.5kw |
Max. Line speed: 450m/min |
Water chilling two roller motor power: 5.5kw |
Oil heating two roller motor power: 5.5kw |
Heating power of mold temperature controller: 24kw |
|
1 | Waste yarn collection system |
| Motor power 15kw |
| |
270 | Winder |
| Model:ATA600DH |
According to different yarns, choose different winding parameters by setting of user independently, perfect spindles, wide usage; |
Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate in circular loom, reduce deviation of fabric width; |
Max. winding diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn; |
Simple structure, little amounts of fast moving spare parts, high intellectualization. |