Welcome Customer !

Membership

ATA Machinery (Guangzhou) Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 纺织机械

Xwboo>Products
Product Categories

ATA Machinery (Guangzhou) Co., Ltd.Free·1YRS

  • E-mail

    HR@atamachinery.com

  • Phone

    86-2062315566-881

  • Address

    2402,North Tower, Suntec Plaza, No. 197 North Guangzhou Avenue, Guangzhou 510075 China

Contact Now

Circular Loom Asiastar-6L

Model
Nature of the Manufacturer
Other
Product Category
--Tape stretching line
Place of Origin
City, Province
Overview
Circular Loom Asiastar-6L Model Asiastar-6LFold width 450-850mmShuttle number 6梭Weft insertion (max.)150rpm
Product Details
The main machine consist
Main machine
  • 36 sets of heddle belt + heddle wire, 18 of heddle wires stations in each group, total 648 pcs.
  • Rolling reed structure is beneficial to the oil-free fabric, enhancing the film coating effect and meets the requirements of food-grade products.
  • The main motor is 3KW Siemens variable frequency drive.
  • With automatic refueling cup, you can set the refueling time and refueling amount on the control screen.
Shuttle
  • The shuttle is equipped with a weft yarn tension automatic control device.
  • The shuttle is equipped with front and back Block yarn plate, which can load max 110mm dia weft yarn.
Weft break / weft end
    Weft break detection system
  • 1 set of magnetic sensor monitors the weft yarn. Ensure that the machine stops automatically when the weft breaks.
  • Weft end detection system
  • Equipped with a photoelectric sensor to control the automatic shutdown when the weft is used up.
  • It is recommended to use black bobbins for best results.
Warp Tension Balance System
  • There is a let-off roller on each side of the main machine
  • Each let-off roller is equipped with a let-off motor: power: 0.09kw
  • There is an aluminum godet roller under each let-off roller, and the godet roller is equipped with a load cell.
  • Ensure that the warp yarn is smoothly fed into the host and maintain real-time tension balance.
Circular loom control system
  • Self-developed PLC controller;
  • Five inverter control;
  • The control panel can be set:
  • Adjust the weft density; set the length of the cloth roll; order instructions.
  • Four-shift output display; running time display; roll change/cloth roll indicator
  • Equipment evaluation system:
  • The running time of the equipment; the number of warp yarn breaks; the number of weft yarn breaks; the number of weft ends, etc.
Fabric winding device
  • A friction type of winding device is equipped with a load cell, which is controlled by a 0.37KW inverter, and the winding motor is a 1.8NM torque motor.
  • We offer a 3″ roll core (standard size).
  • Remarks: 4".6" roll core can be selected - Need to be customized

Technical Parameter
Shuttle/ machine6pcs
Working width450-850mm
Weft insertion (max.)1000ppm
Weft density20-75pcs/10cm
No. of warp tapes *648pcs
Warp/weft core inside diameter35mm
Warp/weft core length diameter220mm
Warp bobbin diameter(max.)160mm
Weft bobbin diameter(max.)110mm
Winding roll diameter(max.)1200mm
Max. weight1600kg
Overall size9500x2750x2850mm