Pos | Description |
1 | Extruder |
| Vacuum Loading system brand: Shini TAIWAN |
| Brand of screw barrel: Golden conch |
| Dia. of screw: Φ120mm |
| L/D of screw: 33:1 |
| Screw material: Nitride 38GrMoAl |
| Max. rotation of screw: 115r/min |
| Max. extrusion: 550kg/h (Depending upon tape characteristics and material) |
| Barrel heating use aluminum heater, solid relay control the heating |
| Barrel heating total power and heating zones: 52.5KW 7zones |
| Die-head using built-in stainless steel heating pipe and solid-state relay |
| T-die brand: Jing Cheng |
| Length of die-head:1300mm |
| Effective length:1200mm Exceed film thickness: 0.07-0.35mm |
| Die-head total heating power and heating zones: 15kw 5zones |
| Melt pump brand: Maag 11kw |
| Siemens AC motor |
| Main motor: Siemens AC motor |
| Motor power: 160kw |
| Screen change method: Auto-belt change screen (Double-net) |
| |
1 | Cooling water tank |
| Material: stainless steel |
| The tank up and down adjustable |
| Manual up and down adjust by chain wheel |
| |
1 | Haul-off unit |
| Water remove plate 2sets |
| Water snap system 1set motor power 3kw |
| Film lifting system 1set motor power kw |
| Water absorb system 2sets |
| Water absorb motor power 3kw. |
| |
1 | Slitting system |
| Slitting shaft type: 6 side blade rotate |
| Specification: non-stop changing blade, can be adjust up & down, and right & left. |
| |
1 | Drawing unit |
| Roller external dia.: 420mm |
| Roller surface treatment:hard chromium plating , glazingTreatment |
| Draw unit Motor power: 7.5kw |
| Max. Line speed: 80m/min |
| |
1 | Edge-film crushing recycling system |
| For direct return of narrow edge trims of non-stretched film into the extruder, consisting of a shredding mill with blower, piping, and air separator |
| Shredding mill motor 2.2kw |
| Blower motor 2.2kw |
| Blower speed 2840rpm |
| Rotate blade speed 1430RPM |
| Crushing capacity 20kg/h |
| |
1 | Double-lay stretching hot air oven |
| Oven length: 6000mm |
| Oven width: 1600mm |
| Effective using width: 1350mm |
| Heating power: 80kw |
| Max. air speed: 10-20m/s |
| Motor: Siemens |
| Fan power: 7.5KW×2sets |
| Fan rotation speed: 1440r/min |
| Up oven pneumatic open |
| Heating using built-in heating pipe and power regulator |
| |
1 | 8 roller stretching unit |
| Roller size: Φ420mm (Bearing SKF) |
| Roller surface deal: Plate Cr, mirror deal (Equip safety cover) |
| Stretching 4 roller power : 18.5kw |
| Max. Line speed : 450m/min |
| Water chilling two roller motor power: 5.5kw |
| Heating power of mold temperature controller 24kw |
| Oil heating two roller motor power: 5.5kw |
| |
1 | Waste yarn collection system |
| Motor power 15kw |
| |
216 | Winder |
| ATA600DH 216 Spindles |
| According to different yarns, choose different winding parameters by setting of user independently, perfect spindles, wide usage; |
| Adopting continuous winding technique, make sure the constant tension of the whole spindle, reduce yarn breakage rate in circular loom, reduce deviation of fabric width; |
| Max. Winding Diameter up to 180 mm, reduce times to change spindles strongly, save labors, increasing usage time of warp yarn; |
| Simple structure, little amounts of fast moving spareparts, high intellectualization. |