Hot Plate Burst Test Bed
Hot plate burst test bed is the equipment used for compressive strength test of braking pipe of auto and tests the failure pressure of braking hose joint at the state of high temperature. The test pressure, temperature and other parameters may be set during the test program. The machine may complete automatically after setting.
1. Test standard: GMW3056
2. Technical Parameters
1) Test pressure: 0~150MPa;
2) Pressurization rate: 5~200MPa/Min;
3) Medium: braking solution and mineral oil;
4) Hot plate temperature at the joint: RT+10~220℃;
5) Internal size of test chamber: 1.2*0.8*0.6M (length* width *height);
6) Hose number of single test: 6 pieces.
3. Functions and Characteristics
1) The test process complies with the requirement specified by standard completely;
2) Safety protection of pressure relief;
3) If shut down occurs with leakage alarm, automatic pressure compensation may be conducted;
4) Test data and curve can be displayed in a real-time manner. The test result can be stored automatically. The test report is printed at will;
5) At the time of emergency shutdown, pressure of the test sample and inside the equipment may be discharged manually;
6) The burst chamber is installed with safety observation window and lighting lamp to observe the test condition conveniently and ensures the safety of testers and equipment;
7) The hot plate of burst test bed is designed with interface of 6 circuits that are connected with test hose separately. Open the corresponding valves at the time of use. During the test process, if there is some leakage, close one or more circuits separately and other tests will not be affected;
8) Data acquisition software of U.S. NI Company is used for real-time analysis and storage and the test report may be produced and printed.