ABS pulse test bed

ABS test bed is the technical upgrading for pulse test bed of common auto pipeline system and is mainly used for pulse fatigue resistance test for hard and soft pipelines of auto braking system and examines the service performance and life of braking pipeline.

1. Test standard:

GMW3056

2. Technical parameters

1) Test pressure: 0~30MPa;

2) Pulse frequency: 0~10Hz;

3) Environment temperature: -50~250℃ (set at will);

4) Test waveform: ABS wave, square wave, triangular wave, sine wave, T-wave, water hammer wave, linear wave, step wave or any type of waveform;

5) Test medium: mineral oil, water or glycol, braking fluid, PAG oil and ATF oil;

6) Vibration mode: axial direction or radial direction;

7) Vibration frequency: 0~20Hz;

8) Simultaneously-tested pipeline number: 2~12 pieces.

3. Functions and characteristics

1) Used for pulse fatigue test of pipeline of auto braking system;

2) Servo control system and computer automatic control;

3) Pulse pressure, test times, pulse wave can be set through computer;

4) The interface displays test data dynamically and draws the real-time time-pressure wave. The wave curve is smooth;

5) Data acquisition software of U.S. NI Company is used for real-time analysis and storage and the test report may be produced and printed;

6) The machine will stop automatically if there is leakage of the tested parts or the pressure is too high with the reasons of fault displayed, enabling convenient operation and repair.