Test Bed for Flow Resistance and Leakage Rate
Test Bed for Flow Resistance and Leakage Rate
1. Introduction to equipment
Functional overview of test bed for flow resistance: used for flow resistance test of products such as many types of oil coolers, condensers and evaporator, etc of auto; the flow resistance performance test adopts differential pressure principle for test; manual clamping (quick clamping fixture may be designed according to customer’s requirement) and automatic test are provided. Flowrate may be adjusted within certain scope. The control system adopts Japan Omron PLC. Main components adopt imported parts; high intelligent digital meters are adopted for pressure, temperature and flowrate to enable not only direct data display but also real-time output of data for processing of PLC. It displays the pressure cycle waveform in a real-time manner dynamically and records and prints the test result according to need.
2. Functional overview of test bed for leakage rate: used for test of leakage rate of products such as many types of oil coolers, condensers and evaporators of autos; the leakage rate test adopts two-level (small flowrate and micro flowrate) flow meter for test. Manual clamping (quick clamping fixture may be designed according to customer’s requirement) and automatic test are provided. The test pressure may be adjusted within 1Mpa at will. The control system adopts Japan Omron PLC. Main components adopt imported parts; high intelligent digital meters are adopted for pressure, temperature and flowrate to enable not only direct data display but also real-time output of data for processing of PLC. It displays the leakage flowrate change curve in a real-time manner dynamically. The test result may be recorded and printed according to need.
3. Advantages of Equipments
1) Quick and efficient—quick installation of fixture, automatic test, easy and convenient operation.
2)Intelligent prompt—instant operation from temperature to audible and visual reminder and identify whether the sample is qualified or not automatically; audible and visual alarm is for result of judgment.
2. Main technical parameters of test bed
1)Medium flowrate: 2~40L/min;
2)Medium temperature: -35℃~150℃;
3)Temperature fluctuation: within ±3℃; The heat preservation time can be set from 0 to 999 minutes at will;
4)Test pressure: 0.1~1MPa, pressure display precision: 0.01 MPa;
5)Test position: single position.