Welcome Customer !

Membership

Tianjin Getes Testing Equipment Technology Development Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 试验机

Xwboo>Products

Tianjin Getes Testing Equipment Technology Development Co., LtdFree·1YRS

  • E-mail

    techhb@126.com

  • Phone

    400-666-7199

  • Address

    NO. 14 ,Fengze Road, Zhangjiawo industrial park,xiqing District,Tianjin

Contact Now

Test Bed for Swell Increment of Hose

Model
Nature of the Manufacturer
Other
Product Category
Auto parts testing equipment
Place of Origin
City, Province
Overview
Test Bed for Swell Increment of Hose
Product Details

Test Bed for Swell Increment of Hose

The swell increment test bed is mainly used for compressive strength test and swell increment test of products such as rubber hose, auto braking hose, power steering hose, etc. The test pressure, time and other parameters can be set in the computer test program. The machine may complete automatically after setting.

1.Main specification of test machine

1)Technical parameters

A)Test pressure: 0.5~25MPa;

B)Pressurization rate: 0.1~2MPa/S (may be set) ;

C)Medium: water, water- glycol and braking solution;

D)Medium/environment temperature: room temperature;

E)Hose number of single test: 1 piece;

F)Diameter of tested sample:Φ3~Φ50mm;

G)Diameter of tested sample: Lmax=900mm;

2)Precision grade

A)Pressure measurement precision: ≤±0.5% F.S;

Minimum display unit of pressure: 0.01MPa;

B)Timing scope: 0.1~9999min;

C)Timing precision: 0.1 seconds;

D)Total volume of burette: 5ml; precision: 0.05ml/scale.

2.Function and scope of application

1)Proof pressure test and swelling rate test;

2)Typical test program: Pressurization with constant speed-pressure maintaining- pressure relief;

3)Volume expansion and change test (for the rubber hose filled with water, the volume change quantity of the hose when the pressure is increased to set pressure. The precision for small volume change that can be measured is 0.05ml at least);

4)During the test process, if shut down occurs with leakage alarm, automatic pressure compensation may be selected;

5)Achieve the function of computer control; the time for water injection for air discharge, pressure maintaining time, test pressure can be set freely. The pressurization rate may remain constant to achieve stepless regulation and may be set. The test data and curve parameters can be displayed in a real-time manner. The test result can be saved automatically;

6)At the time of emergency shutdown, pressure of the test sample and inside the equipment may be discharged manually;

7)The tested sample is installed on the test bed for test and is far away from operation control area. Even if the hose burst, it will not pose potential safety hazard for testers;

8)Data acquisition software of U.S. NI Company is used for real-time analysis and storage and the test report may be produced and printed.

Similar Product Recommend