DYCC3 series EP Magnetic chuck
DYCC3 series EP Magnetic chuckfor vertical lathe(strong magnetic).
DYCC3 series lathes with circular permanent magnet sucker,uses the unique variable cross-section magnetic pole structural design,The outer diameter increase suction strengthens gradually,Dual magnetic circuit design,T-slot design of the magnetic field superimposed,Easy pad plus magnetic blocks(The user can according to the workpiece surface condition,Self-made with special-shaped magnetic blocks,Even if attracts gathers the surface is the attire which the curved surface also can use clamps the tool)
Features:
1 Super Power Magnetic Force 16KG/CM2
2 1~3 Seconds controller for power On& OFF, No Electric Power Supply Required to Keep the magnetic chuck on
3 No Power Supply required to keep the magnetic chuck on,
4 Can do 5 sides machining, No obstructed movements of cutters during marching, helps in achieving best machining accuracy
5 easy and convenient to clamp a work piece, Reduce set-up time and increase available machine time.
Application
1 Most Suitable for machining on Medium & Small or Even rough Work piece
2 Suitable for Drilling and finishing machining on small work piece

Main technical parameters | Type&Data | Magnetic pole number | Total magnetic force(≤KN) | Overall dimension(mm) | Weight(kg) |
| D | d | H |
| DYCC3-500 | 12 | 70 | 500 | 60 | 70 | 95 |
| DYCC3-600 | 12 | 100 | 600 | 60 | 70 | 135 |
| DYCC3-800 | 16 | 160 | 800 | 150 | 80 | 290 |
| DYCC3-1000 | 16 | 200 | 1010 | 200 | 80 | 460 |
| DYCC3-1300 | 24 | 360 | 1260 | 300 | 90 | 680 |
| DYCC3-1500 | 24 | 480 | 1520 | 500 | 100 | 1240 |
| DYCC3-1600 | 40 | 600 | 1620 | 800 | 125 | 1560 |
| DYCC3-1800 | 40 | 800 | 1820 | 800 | 125 | 2050 |
