High temperature and sterilization resistance black hot stamping foil SCF908

Ribbon material: Base material: polyester film

Base film thickness: 12μm

Total thickness: 21-23μm

Ink color: black

Printing characteristics: Under the premise of selecting a suitable printer, the coding parameters should be adjusted within the following ranges, and the conditions that are most suitable for the corresponding printer and transfer material should be selected:

Temperature range: 140℃-180℃ (recommended 150℃-160℃)

Subject to the actual temperature of the prefix measured by the thermometer

Pressure range: 0.3~0.5MPa (recommended 0.4 MPa)

Coding speed: 30-600 times/min (the best transfer speed is 50-200 times/min)

Printing effect: The printed handwriting is slender and round, and has good abrasion resistance (the printed handwriting can be sterilized by 80-100℃ purified water for less than 30 minutes, and the handwriting can not be wiped off after cooling and drying).

Applicable materials: It is suitable for food, medicine and high temperature sterilization requirements, and its products do not require long-term freezing and cold storage. It can be used for PET, milk bags, aluminum foil and various composites. Film printing.