Welcome Customer !

Membership

corporate name:Foshan Qingyi metal material Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 铜接线端子

Xwboo>Products

corporate name:Foshan Qingyi metal material Co., Ltd.Free·1YRS

  • E-mail

    3576297451@qq.com

  • Phone

    0757-228198920757-22819893

  • Address

    News 3 / F, No. 80 west of Shiliang Road, Jizhou village, Lunjiao street, Shunde District, Foshan (residence declaration)

Contact Now

DT copper nose DT copper lug

Model
Nature of the Manufacturer
Other
Product Category
Terminal copper nose
Place of Origin
City, Province
Overview
Copper terminal block, copper nose, DT copper terminal block, DT copper terminal lug, long-term spot supply of Foshan Qingyi, non-standard customized
Product Details

Overview of copper terminals:

Copper nose is also known as wire nose, copper wiring nose, copper pipe nose, wiring terminal, etc. it is called differently in various places and industries. Copper nose shall be used only for wires larger than 10 square meters. Copper nose shall not be used for wires smaller than 10 square meters, and cold pressed wire nose shall be used instead. Copper nose can be divided into tin plated and non tin plated surface, tube pressure type and oil blocking type.

The product has good appearance specification, good conductivity and safety. Product : it is suitable for the connection between the copper conductor of electrical cable wire and electrical equipment with a nominal section of 10-800 square meters. Product features: long-term working temperature - 55 ℃ - 150 ℃, surface tin plating. Product material: copper tube, surface treatment: tinning

Main scope of application: widely used in machine tools, textile machinery, motors, railways, ships, electronic control, household appliances, electrical industry, mechanical equipment factory, shipyard, power distribution cabinet, power distribution instrument, computer and household appliances.

Cable nose (DT) is often used for cable end connection and continuation, which can make the connection between cable and electrical appliance more firm and safe. It is a common material for construction, power equipment, electrical connection and so on. When the general conductor is connected with the wiring terminal, the corresponding wiring connection terminal shall be used for the cable end connection according to the requirements of the national wiring code. And if it's 4mm ² The above multi strand copper wires need to be equipped with a wiring nose and then connected with the wiring terminal. The product has good appearance specification, good conductivity and safety.

Cable nose is often used for cable end connection and continuation, which can make the connection between cable and electrical appliance more firm and safe. It is commonly used for building, power equipment, electrical connection and other materials. In some places, it is commonly known as copper lug. When connecting the general conductor with the wiring terminal, the corresponding wiring terminal shall be used for the cable end connection according to the requirements of the national wiring code. And if it's 4mm ² The above multi strand copper wires need to be equipped with a wiring nose and then connected with the wiring terminal.

Calculation of copper terminal wiring

Wiring terminal is a kind of accessory product used to realize electrical connection. It is divided into the category of connector in industry. With the higher and higher degree of industrial automation and the more strict and accurate requirements of industrial control, the consumption of wiring terminals is gradually increasing. With the development of the electronic industry, more and more terminals are used, and there are more and more types.

In the electrical circuit, in order to ensure reliable and convenient wiring, connect the copper crimping terminal with the wire with a special crimping pliers at the end of the wire. Ot type or ut type are commonly used; For example, ot2.5-5 clamps 2.5 square wires, the screws are 5mm, and so on for other models.

1. First, divide the terminal wiring and non terminal wiring. Generally, the wiring of 10mm2 and below shall be regarded as non terminal wiring (unless line terminals are required for special requirements, this case shall be regarded as having terminals); Those above 10mm2 shall be calculated as welded or crimped copper wire terminals with terminal wiring.

2. The cable terminal head of 10mm2 and below is not manufactured and installed according to the process requirements of the terminal head, but when the wire head is stripped out and directly crimped for wiring, it can not be counted as the cable head, but only the wiring without terminal; In case of crimping nose, it shall be calculated as if there are terminals.

3. The incoming and outgoing lines of distribution box, cabinet, panel, junction box and terminal box shall be calculated according to the specification and number of wire ends. Relevant quota sub items of non terminal, terminal or crimped (welded) copper wiring terminal shall be set.

The product has good appearance specification, good conductivity and safety.

Red copper, brass surface treatment: Silver Plated welded junction national standard specification.

Household appliances, electrical industry, mechanical equipment factory, shipyard, distribution cabinet, distribution box, etc.

The wire noses sold by Qingyi are made of T2 red copper, with a copper content of 99.9%, which ensures the product quality, safety and reliability, superior electrical conductivity, and the specifications meet international standards.

Terminal block of pressure free wire nose.

Key words: copper terminal copper nose wire ear wire nose

Cable nose is often used for cable end connection and continuation, which can make the connection between cable and electrical appliance more firm and safe. It is commonly used for building, power equipment, electrical connection and other materials. In some places, it is commonly known as copper lug. When connecting the general conductor with the wiring terminal, the corresponding wiring terminal shall be used for the cable end connection according to the requirements of the national wiring code. And if it's 4mm ² The above multi strand copper wires need to be equipped with a wiring nose and then connected with the wiring terminal.