F7 RESIDUAL CURRENT DEVICE
| |
| APPLICATION | The RCD is in conformity with the standards of IEC1008, GB16916 and BS EN61008. The RCD can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk, thus it is suitable to avoid the shock hazard and fire caused by earth leakage The RCD is mainly suitable for using in variety of plants and enterprises, building construction, commerce, guesthouses and families. It can be used in circuits up to single phase 230V, three phases 400V 50 to 60HZ, RCD is not suitable for using on DC pulse system. | | TECHNICAL DATA | Standard: IE1008, GB16916, BS EN61008 Rated voltage (Un): 2poles: 230V AC 4poles: 400V AC Rated current (In): 25, 40, 63A Rated residual operating current(I△no):0.5I△n Residual current off-time:≤0.1s Minimum value of rated making and breaking capacity (Im): 1KA Rated conditional short-circuit current (Inc): In=25, 40A Inc=1500A In=63A Inc=3000A Endurance: on load: 200 cycles Off load: 2000cycles | | ELECTRICAL | Design according to | IEC 1008 (EN61008) | Tripping time | undelayed min.10ms delay min.40ms delay with selective disconnecting function | Rated voltage | 230/400V;50Hz | Rated tripping current | 10,30,100,300,500mA | Sensitivity | AC and pulsating DC | Rated short | 10KA with 63a gl back-up fuse | Circuit strenth | 10KA with 80A gL (F7-80 and -863) 6KA (rated current 63A) with 63A gL | Maximum back-up fuse for | 63gL | short circuit protection | 80A gL(F7-80 and -863) | maximum back-up fuse for | 45A gL(F7-25 and -40A) | Overload protection | 40A gL(F7-80A) | Resistance to climatic conditions | according to IEC 1008 | Degree of protection | built-in switch IP 40 | Endurance electrical comp. mech comp | ≤4.000 operating cycles ≥20.000 operating cycles |
| | MECHANICAL | Frame size | 45mm | Socket size | 80mm | Device width | 35mm(2mod.), 70mm(4mod.) | Mounting | quick fastening with 2 lock-in positions on DIN rail En50022 | Upper and lower terminals | Open mouthed/lift terminals | Terminal protection | Finger and hand touch sage, VBG5, OVE-EN 6 | Terminal capacity | 1--25mm2 | Busbar thickness | 0.8-2mm |
|
|
| |
 |