Welcome Customer !

Membership

Wenzhou Haocheng Machinery Technology Co., Ltd
Free Member ·1YRS
,
Other

Main Products: 全自动横切机

Xwboo>Products

Wenzhou Haocheng Machinery Technology Co., LtdFree·1YRS

  • E-mail

    qianhui@zj -haocheng.com

  • Phone

  • Address

    No. 333, Weiwu Road, Gexiang Development Zone, Rui'an, Zhejiang

Contact Now

HC-350Z/450Z medium speed die cutting machine + special shaped waste discharge

Model
Nature of the Manufacturer
Other
Product Category
Self adhesive trademark die cutting machine
Place of Origin
City, Province
Overview
HC-350Z/450Z medium speed die cutting machine + special shaped waste discharge
Product Details


Extended function:Film covering, bronzing, punching

Standard functions:Discharge - die cutting - special shaped waste discharge - slicing - winding


Scope of application:

Die cutting of paper self-adhesive trademark, nylon film trademark and laser anti-counterfeiting trademark. The machine is the best supporting equipment for full wheel high-speed drum trademark printing machine, flexographic printing machine, continuous silk screen printing machine, gravure printing machine and anti-counterfeiting trademark molding machine. It is also the most ideal model for trademark printing plants. It is suitable for die cutting and molding in electronic industry and adhesive tape products industry.


Performance characteristics:

In order to facilitate customers' use and later maintenance, the machine is upgraded from the upper and lower iron plates with traditional flat pressing structure to: 1. The upper knife plate is changed to aluminum material, and the lower knife plate is changed to 2mm thick stainless iron, which is absorbed by electromagnetic coil; 2. The DC motor controlled by the traditional circuit board is replaced by the three-phase AC motor controlled by the frequency converter, and the failure rate is very low. 3. The computer servo system pulls the paper, and the two sides and longitudinal direction of the material are tracked and positioned by photoelectric eyes. Discharging - die cutting - waste discharge - slicing or winding are controlled by the computer at one time.


Technical parameters:
                                                                                                       
型号Model

HC-350Z

HC-450Z
进料宽度Maximum feed width

350mm

450mm
模切面积Die cutting area

350*350mm

450*450mm
模切速度Die cutting speed

30-300press/min

30-300press/min
模切精度Die cutting accuracy

±0.10mm

±0.10mm
主机功率Power of main motor

3kw

5.5kw
外形尺寸Size(L*W*H)

2900*1400*1600

2900*1500*1650
放料直径Unwinding/rewinding diameter

600mm

600mm
电压Voltage

380v

380v
总功率Total power

6.5kw

9.5kw
重量weight

约1700kg

约2300kg