Note:
1. Scope of application Because this series of pumps are used for agricultural irrigation, the pH of the applicable liquid is between 5 and 0, and the temperature of the liquid is less than 80 C. It cannot be used for pumping muddy water.
2, start to join the water pump This series of pumps is a self-priming pump, before the operation must be added water at the top of the water outlet, until the yellow full, if you do not add water, the pump can not pump water. The well will therefore wear out the mechanical seal.
3. The connection of the straw (the connection of the inlet pipe) must be fastened to the pipe connection with the hoop. If the pump is filled with water, the normal operation still cannot be pumped. It may be that the pipette leaks. Retighten the hoop.
4. The running direction of the pump is subject to the direction indicated by the arrow, and reverse operation is strictly prohibited.
5. It is recommended that the speed should not exceed 400 rpm, and the motor should be matched. Please refer to the parameters on the pump nameplate for the power and speed of the steam (Chai) oil machine.
6. After the work is completed, drain the water from the pump body. If the water is frozen below 0C, if the water in the pump body freezes, the pump will rupture and the water discharge port will be at the bottom of the pump body.
7. The matching motor belt pulley and belt should be related to the model on the pump.
8. The pump must be fixed before work, and the well and supporting motor should maintain a space of 0.8 meters or more.
| MODEL | SU-25 | SU-40 | SU-50 | SU-80 | SU-100 |
| Connection Dia(mm) | 25(1'') | 40(1½) | 50(2'') | 80(3'') | 100(4'') |
| Head (m) | 21 | 24 | 36 | 36 | 25 |
| Volume(m³/h) | 15 | 20 | 25 | 40 | 80 |
| Revolution(rpm) | 3600 | 3600 | 3600 | 3600 | 3600 |
| Packing dimen sions | 3 | 4 | 5.5 | 7 | 1.3 |