Welcome Customer !

Membership

Hangzhou Jiaju Machinery Accessory Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products
Product Categories

Hangzhou Jiaju Machinery Accessory Co., Ltd.Free·1YRS

  • E-mail

  • Phone

    0571-82479615

  • Address

    Shanlian village No.333 Suoqian Town Xiaoshan DIstrict Hangzhoue

Contact Now

Internal and external circular transformation

Model
Nature of the Manufacturer
Other
Product Category
Bearing
Place of Origin
City, Province
Overview
Internal and external circular transformation
Product Details
Introduction

* application: grinding facilities, transformation can be manufactured according to user requirements shall be separately designed

内外圆磨床通用主軸:适用机床有内外圆磨床、端面内外圆磨床、軸承专用磨床、曲轴磨床等。

Universal spindle for internal and external cylindrical grinding machine: the application of machine tools has internal and external cylindrical grinder, internal and external cylindrical grinding machine, bearing special grinder, crankshaft grinding machine, etc..

综合外圆类磨床常用静压、 动静压主軸的直径和跨距, 结合导轨参数, 考虑到许用功率下径向、 軸向承载能力及套筒和軸承的合理壁厚, 根据止推軸承不同的布局方式, 供新产品设计时选用 。 主軸运动精度0.5-0.3um, 特殊订货0.2um。主軸旋转方向按要求确定。主要参数如下:

Comprehensive round type grinder commonly used static pressure spindle diameter and span, with rail parameters, considering the reasonable wall axial power, Xu radial bearing capacity and bearing sleeve and thick, according to the layout of the thrust bearing different, selected for the new product design. Spindle motion accuracy 0.5-0.3um, special order 0.2um. The direction of rotation of the main shaft is determined according to the requirements. The main parameters are as follows:


注:所有尺寸单位均为mm,锥度均为1:5,且大端与长度比为1:1。表中: L箱体长度, L0主轴长度, L1套筒内端面到轴端长度, L2锥面长度, L3套简内端面与锥面大端长度, L4套筒内端面到驱动端大端长度, L5驱动端锥面长度, D套筒外径, D1套筒前端直径, D2套简法兰直径, d锥面大端直径, dl驱动端大端直径,H套筒法兰宽度。表中代号中 A代表主轴止推在前端, B代表止推在中间。许用功率为砂轮线速度35m/s的情况下, 主抽全功率切削轴承能承受的载荷 。

Note: all dimensions are mm, taper was 1:5, and the big end and length ratio is 1:1. Table L: body length, L0 spindle length, L1 end to end of the shaft sleeve length, cone length L2, length L3 and cone end end sleeve, drive end end to end sleeve length L4, L5 drive end cone length D, diameter D1 sleeve, the front end of the sleeve diameter, D2 sleeve flange diameter D, DL drive end cone main diameter, big diameter, H sleeve flange width. A represents the main axis of the main shaft at the front end of the table, and B stands for the stop in the middle. In the case of the 35m/s of the grinding wheel line speed, the load of the main pumping full power cutting bearing can withstand.