Micro Drip and Micro Spray Irrigation
* Micro Irrigation,is according to crop demand, by the end of the pipe system and installation in the piping on the water, the water and nutrients required for crop growth with small flow rate, uniform and accurate delivery directly to the crop root soil near a irrigation method. With the traditional compared to whole area of wet ground irrigation and sprinkler irrigation, micro spray irrigation only to smaller flow moist part near the crop root zone soil, therefore, also known as the local irrigation technology.
* Micro-irrigation is divided into the following four types:
surface drip irrigation, is a level by the end of the pipe (called capillary) on the water, which drops the head, the pressure of water in the form of intermittent or continuous flow irrigation to the crop root zone near the soil surface irrigation form.
Subsurface drip irrigation, SDI, the water is directly applied to the crop root zone under the surface of the earth, its traffic and close to the surface drip irrigation, can effectively reduce the surface evaporation, is the most water-saving irrigation form.
Micro spray irrigation, (Micro-spray or Micro jet or mini sprinkler irrigation), is to use the installed directly on the capillary, or connected to the capillary water, the Micro nozzle, the pressure of water in the form of spray in the crop root zone soil near the surface of a form of irrigation, Micro injection for short. Micro spray irrigation has increase air humidity, adjust the action of field microclimate. But in some cases, such as lawn sprinkler irrigation, belong to the whole area of irrigation, strictly speaking, it is not completely belongs to the category of local irrigation, but a small flow irrigation technology.
Bubbler irrigation, the pressure in the pipeline of water through irrigation, the water, in the form of small water or spring water to a form of water on the surface of the soil.
 |  |
| ZB Series Dry Self-priming Trailer Pump | Fixed Pump Station |