Welcome Customer !

Membership

Skylink Fluid Technology(shanghai) Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: skylink气动隔膜泵

Xwboo>Products

PDSK Series Powder Transfer Pump

Model
Nature of the Manufacturer
Other
Product Category
PDSK Series Powder Transfer Pump
Place of Origin
City, Province
Overview
BULK DENSITY MAX FLOW RATE 0.08-0.8 g/cm³ 2500 Kg/h AIR INLET MAX PRESSURE 3/4BSPT 8.6bar (125psi) LIQUID INLET MAX DIAMETER SOLIDS 38mm(1-1/2)BSPT 6.3mm(1/4) LIQUID DISCHARGE DISPLACEMENT PER STROKE 38mm(1-1/2)BSPT 1.2L(0.34gal) *1 cycle = 2 strokes CONNECTION TYPE MATERIAL BSPT(Threaded) AL/316L/CI ANSI DIN(Flanged) WEIGHT MAX SUCTI......
Product Details

Characteristic

New perfect powder transportation equipment with low failure rate

  • Can replace the inefficient manual powder transportation mode and be directly applied to the transportation of solid powder to reduce air pollution and raw material waste
  • Adopts the fully closed transportation mode to directly transport the powder from the raw material container to the receiving container at the formula, so as to reduce dust pollution in the working environment and ensure personal safety
  • Maximum bulk density of transporting powder can reach 0.8g/cm3, the maximum siphon height can reach 5m, and the maximum transporting capacity can reach 5,500Kg/h
  • Intermittent high efficiency airflow induced fluidization system can optimize the material and gas ratio, reduce gas consumption and material gas-solid ratio, and prevent powder accumulation;​
  • Separated fluidizing gas and driving gas can avoid the oxidation and deliquescence of the material in contact with the air and the gas in contact with the powder can be further purified and dried separately, or use other gases.
  • Can replace air mixed transportation, screw transportation and scraper transportation
  • can continuously transfer dry powder with specific gravity up to 0.8g/cm3 without failure, such as carbon black, pigment powder, combustion supporting agent, expanded mica, silicone, acrylic resin, 3D printing powder, silicone resin and pharmaceuticals, etc.

Download

Dimensions

 

Material

PARTMATERIALS
Material of wetted partsAluminum alloy, 316L stainless steel
Material of non-wetted partsAluminum alloy(electrophoresis)
Air valveAluminum alloy(electrophoresis)
PARTMATERIALS
Santoprene-40°C to 107°C (-40°F to 225°F)
Neoprene-18°C to 93°C (0°F to 200°F)
Polytetrafluoroethylene (PTFE)4°C to 104°C (40°F to 220°F)
Nitrile rubber (Buna-N)-12°C to 82°C (10°F to 180°F)
EPDM-51°C to 138°C (-60°F to 280°F)
Fluorine rubber (FKM)-40°C to 177°C (-40°F to 350°F)

 

 

未找到相应参数组,请于后台属性模板中添加
Similar Product Recommend