Welcome Customer !

Membership

NINGBO HELSH-TECH FLUID CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

NINGBO HELSH-TECH FLUID CO.,LTDFree·1YRS

  • E-mail

    hls@helsh-tech.com

  • Phone

    0574-86906070

  • Address

    No.6,Sanqi Jingtou Industrial Point,Yuyao City,Ningbo City,Zhejiang Province

Contact Now

HEP3 homogeneous emulsion pump

Model
Nature of the Manufacturer
Other
Product Category
HEP3 homogeneous emulsion pump
Place of Origin
City, Province
Overview
HEP3 homogeneous emulsion pump
Product Details

Product introduction:

There are three groups of rotors and stators in the working cavity of HEp3 homogeneous emulsion pump. Each rotor has two layers of toothed discs. There are 12 layers of toothed discs in the three groups of rotor stators. The clearance between the rotor and stator teeth from the inlet to the outlet is from thick to thin. Under the same specifications, HEp3 can provide better emulsification effect and larger processing capacity per unit time than hep1. When HEp3 works, the materials are dispersed, refined and emulsified step by step through the three-stage rotor and stator, which greatly improves the production efficiency. It is a high-efficiency ultra-fine homogenization pump integrating mixing, dispersion, crushing, dissolution, refinement, depolymerization, homogenization, emulsification and transportation. The product further simplifies the traditional production process and significantly improves the product quality, It is an ideal product instead of colloid mill.

The product is suitable for large and medium batch continuous on-line production or circular production process.


HEP3均质乳化泵

Single butterfly rotor pump over-voltage protection function: advantages: automatic pressure adjustment maintenance pump can avoid common faults and mechanical equipment problems. Principle: the "spring" and "piston" of the packing in the exhaust pipe generally push the pressure to the part of the pump in contact with the liquid. When the pressure inside the pump (or the part in contact with the liquid) is higher than the pressure increased by the spring, too low pressure will promote the packing of the exhaust pipe upward from the part in contact with the liquid along the reverse direction. This causes the fluid to flow in the opposite direction according to bypass a and B, which in turn suppresses the pressure build-up inside the pump (part of the fluid in contact). The natural ventilation cover includes adjusting anchor bolt, lock nut, cap nut, spring fixed splint, spiral spring, swinging rotor pump, guide shaft sleeve, piston, piston O-ring, exhaust pipe packing and waterproof sleeve cover.

HEP3均质乳化泵

Similar Product Recommend