Welcome Customer !

Membership

NINGBO HELSH-TECH FLUID CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

NINGBO HELSH-TECH FLUID CO.,LTDFree·1YRS

  • E-mail

    hls@helsh-tech.com

  • Phone

    0574-86906070

  • Address

    No.6,Sanqi Jingtou Industrial Point,Yuyao City,Ningbo City,Zhejiang Province

Contact Now

HCP homogeneous mixing pump

Model
Nature of the Manufacturer
Other
Product Category
HCP homogeneous mixing pump
Place of Origin
City, Province
Overview
HCP homogeneous mixing pump
Product Details

Product introduction:

HCP homogeneous mixing pump has multiple feed pipes, which are discharged from one outlet after homogeneous mixing. The number of rotor stator gear plates of the homogeneous mixing pump is equipped with 2 ~ 4 layers according to different working conditions. The tooth clearance between rotor and stator of each layer is from thick to fine, so that multiple groups of feed can be mixed evenly in an instant. The product is widely used in the production process, which requires a variety of materials to be mixed and homogenized, as well as the neutralization and mixing in the chemical process.

After using the mixing equipment, combined with the feed flow control system, the homogenization mixing process can be controlled online, so that the original traditional production process is further simplified, the traditional pre mixing system is removed, the production efficiency is greatly improved, and the cost of equipment and energy consumption is effectively reduced.

HCP均质混合泵

Rotor pump in the whole process of work can transport chemical substances or some corrosive substances, and do not have to worry about the variable frequency rotor pump price will be eroded by this material, so at this stage the equipment is used a lot. But the equipment in the whole process of work is also inevitable to produce some common fault problems, if encountered a general common fault, according to the following methods to regularly check and deal with. If the working efficiency of the rotor pump is reduced, it is necessary to immediately check whether the parts of the equipment are loose. In the whole process of application of many equipment, due to the loose parts, the transportation rate of the equipment will also be reduced. In addition, once the noise problem occurs in the working condition of the equipment, the work should be stopped immediately to check whether the parts of the equipment must be moistened, and whether the swing rotor pump manufacturer or the simple maintenance must be carried out. Nowadays, with the continuous development trend of high and new technology, the working efficiency of the rotor pump has been gradually improved. However, in order to make the equipment work better, it is necessary to check the characteristics of the equipment and the working conditions of the parts on time.

HCP均质混合泵

Similar Product Recommend