Welcome Customer !

Membership

Qidong High Pressure Oil Pump Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 泵

Xwboo>Products

Qidong High Pressure Oil Pump Co., Ltd.Free·1YRS

  • E-mail

    jgyb@jgyb.com.cn

  • Phone

    +86-513-68262963,+86-513-83313659

  • Address

    188 Nan Ping Road, Qidong City, Jiangsu Province

Contact Now

ZCY14-1B Axial Piston Pump

Model
Nature of the Manufacturer
Other
Product Category
CY14-1B Axial Piston Pump
Place of Origin
City, Province
Overview
The pump is based on the external control of oil pressure (≥7MPa) to operate the variable mechanism, can not be zero to center, but with a connection feedback signal tie rod, in the automatic control system, using electro-hydraulic servo (proportional) valve to control the variable mechanism, proportional control can be achieved
Product Details

Product Introduction

Product Overview:
CY14-1B series pump is an axial piston pump with cylinder rotation and variable head (swash plate) variable. Due to sliding boots and variable between head, oil distribution plate and the cylinder body adopts hydraulic static equilibrium design of oil film thickness between the two surface of sport in the pure liquid friction under operation, and eliminating the heavy thrust bearing, and compared with other types of pump, has a simple structure, small volume, high efficiency, light weight, low noise, long service life, strong self-priming capacity, etc, It is suitable for hydraulic equipment such as forging machinery, machine tool, ship, aviation, metallurgical machinery, plastic machinery, engineering machinery and mining machinery.
 
Working Principle:
The pump is based on the external control of oil pressure (≥7MPa) to operate the variable mechanism, can not be zero to center, but with a connection feedback signal tie rod, in the automatic control system, using electro-hydraulic servo (proportional) valve to control the variable mechanism, proportional control can be achieved. For the oil supply of external oil control, if the user requires that the time required for the pump flow between Qmax-Qmax is T seconds, then the flow of external control pump is recommended as Q control ≥ Q/T (L /min). Q is shown in the table below.

Model Specification:




Structure Chart:




Overall Dimensions: