Q-3680Q is a new generation of multi-function modular IPQAM modulator from Gauss Bell. It can receive MPEG / II transport stream encapsulated by UDP / RTP with multiple IP input, and multiplex, scramble and insert local information. , And then perform QAM modulation, and finally output the RF signal.
GQ-3680Q can be applied to the front-end of cable digital television stations, sub-front-end computer rooms, or editing and broadcasting centers. A single device can meet the diverse information processing needs of customers; it can also be used as an edge IPQAM modulator under the VOD system architecture.
Front panel:
Rear panel:
Main Features
· Modular card design, easy to upgrade and maintain
· With GbE Gigabit Ethernet input and loop-out, single interface up to 960Mbps data throughput
· Support UDP, RTP, IGMP and other data transmission protocols
· Supports management and control using HTTP, SNMP and other protocols
· With 1 + 1 optical interface (or electrical interface) redundant backup to ensure high reliability of data reception
· With high integration, stand-alone 1RU achieves 16, 32, and 48 frequency points of RF radio frequency signal output
· Comply with ITU-T J.83 Annex A, B international standards, compatible with DVB-C standards
· Each frequency point can reuse up to 64 sets of programs, each program has 16 PID processing capabilities
· Compatible with DWDM fiber network, optional single-mode / multi-mode optical receiving
· Support TS over IP, multiplexing, scrambling, PSI / SI processing, modulation and up-conversion
· Supports up to 4 CAs with the same secret, session and non-session (fixed key) information encryption
· Support 16/32/64/128/256 and other QAM modulation modes
· Support full-band agility, output signal frequency range is 30 ~ 860MHz
· Support MPTS, provide broadcast services required
· Support VOD functions such as UDP port mapping, PID mapping, and automatic generation of multiplexed stream basic tables
· Supports automatic or manual port mapping
· With powerful background configuration function and network management monitoring system to ensure high stability of equipment operation
· With excellent RF index, to ensure the high reliability and scalability of the network
· Support dual power backup to ensure high security of equipment operation
· Centralized SNMP network management system for remote or local network monitoring
· Support remote online upgrade
Technical Specifications
Multiplexing Scrambling |
|
multiplexing | PSI / SI tables support automatic generation or manual insertion |
Support intelligent program search |
|
Maximum multiplex programs: 1024 |
|
Scrambling | Support program-level scrambling |
Supports session or non-session encryption |
|
Support 4 CASs |
|
EMM bandwidth | Maximum number of scrambled programs: 1024 |
Bit rate statistics | Maximum bandwidth 3Mbps |
Management |
|
Physical interface type | Ethernet 10/100 Base-T |
port | RJ-45 |
protocol | TCP/IP, SNMP |
Power consumption |
|
Input voltage range | 100~240V AC |
Input frequency range | 50/60Hz |
Power consumption | <> |
Environment |
|
range of working temperature | 5℃~45℃ |
Storage temperature range | -25℃~85℃ |
Ambient humidity range | 10%~90% |
Physical index |
|
Size (W x H x L) | 483mm x 44mm x 450mm |
Total Weight | <6>6> |
IP Interface
|
|
Physical interface type | RJ45-Gigabit Ethernet |
Physical bandwidth | 1000Mbps |
Number of interfaces | 0-2, can be configured as input or output * |
Protocol | UDP |
SFP Interface
|
|
Physical interface type | SFP |
Physical bandwidth | 1000Mbps |
Number of interfaces | 0-2, can be configured as input or output * |
RF Output |
|
Physical interface type | F-Female [Imperial female] |
impedance | 75 |
Channel mode | ITU-T J.83 Annex A / B |
Number of interfaces | 2 |
Symbol rate | 4.2 ~ 7Mbaud / s |
Constellation mode | 16/32/64/128/256 QAM |
Output frequency | 30 ~ 860MHz |
Output level | 98dBuV ~ 118dBμV |
Gain trim | -2.5 ~ 10.5dB in steps of 0.25dB |
MER | ≥ 45dB (on equalization) |
Isolation | ≥ 75dB |
Return Loss | ≥ 14dB |
Typical Application
Broadcasting
VOD