LCU1016 elevator floor controller
feature of product:
1, lightning design (10KV500A reaction rate 1-10 ns)
2, to adapt the mains voltage fluctuations (switching power supply design, input range AC180V-250V)
3, to prevent crashes (multi-level watchdog circuit design)
4, data, clock never lost (American original chip built-in battery)
5, hardware design highly integrated, simpler structure, less failure (backup power supply integrated design, the host)
6, additional powerful (alarm, patrol, etc.)
Software features:
1. Direct and optional floor can be used simultaneously
2, a collection of embedded access control function
3, visitors can any time change
4, floor names can be customized
5, can be customized to change the password floor
6, you can install multiple clients
Product Performance
Can control up to 16 layers, layer 48 may need to be extended to the floor under the project. Optional floor and direct access can be used simultaneously;
Each floor has a separate password for easy boarding card without the owner;
The controller has a sleep, safe, normally open, such as several operating modes;
Supports RS-485 network function, independently run offline use, you can manage up to 20,000 users, an increase of RAM memory, expandable to 80,000 cardholders
In non-networked state can be separately stored 10,000 records, data retentivity for more than 10 years;
When the data is automatically uploaded back online
Having a set of input switch emergency stop button, the elevator during emergencies to restore the original function;
Having a fire signal input terminal, elevator restore the original function in the event of a fire alarm;
Multiple system board condition monitoring and self-test (for example: external power failure, data errors, network anomalies and Complex Systems
Features:
Provide two standard card reader interface
Support Wiegand 26Bit Wiegand 32Bit Wiegand40Bit
Support ABA (second track)
Support biometrics
Support for fingerprint recognition technology
Supports password keyboard
Access privileges can be programmed period of time 15 groups
input Output:
64 set of passive dry contact output control terminal;
Group 2 reader input terminals;
2 group control the power supply input terminal (+ 12V / 5V);
1 set of external emergency stop signal input terminal;
Group 1 expansion board signal output terminal;
Group 1 Fire signal (active 48V) input terminal;
Dynamic voltage protection performance
All inputs / outputs with dynamic voltage protection
All relay outputs with transient over-voltage protection
Network Communication Features
An RS485 network communication interface, can be connected to the elevator controller 127;
Network total length of up to 1,200 meters, can be extended through the communication distance long drive;
Communication rate: 9600bps;
DIP switch settings Introduction
SW 1-7 bit controller address code setting
SW 8 input terminal status setting