F16 Fingerprint Access Control machine
Hardware Specifications:
◎ 2.8 "TFT.
◎ Support doorbell button.
◎ 12V DC input, rated current of 3A design.
◎ high-speed RS485 support (slave).
◎ 100M Ethernet support.
◎ 5V relay alarm output.
◎ 5V relay lock signal.
◎ Magnetic probe input (optocoupler isolation).
◎ Wiegand 26/34 output.
◎ Wiegand input (optocoupler isolation), 12VDC output MAX 500mA, with overcurrent protection design.
◎ 5ppm temperature compensated clock.
◎ tamper alarm.
◎ hardware reset the watchdog support.
◎ reset button.
◎ USB HOST / Device Support (OTG), U disk support.
◎ 16MB industrial grade RAM.
◎ 8MB memory Flash.
◎ 8ohm 0.5W speaker output.
◎ 500DPI optical fingerprint sensor input.
◎ Optional ID / IC card support.
◎ optional TF card, mass storage (optional).
◎ color red and green lights.
◎ the Power On (Note optional, defaults to the Power On).
◎ operating temperature, -20 ℃ to 70 ℃.
◎ wall, with iron, 3MM thick shell design.
Features:
◎ access control function, period, group, unlocking combination settings support complex access logic.
◎ attendance, automatic reports, departments and personnel management.
◎ support card, password, fingerprint authentication.
◎ can work offline, you can also access complex network monitoring.
◎ real-time fingerprint image.
◎ Verify speed <1s.
◎ FAR <0.001%.
◎ FRR <0.01%.
◎ Capacity 800
◎ recording capacity of 100,000.
◎ TCP / IP, RS485 networking.
Features:
◎ large-size TFT, friendly and human-computer interaction, the shell reinforcement, solid and reliable.
◎ scalable, scalable IC / ID, Wiegand input and output.
◎ suitable for complex work environment, stringent and device selection.
◎ Input and output are done mine, opto isolated, fuses, good safety performance.
◎ hardware watchdog to ensure always work.