Welcome Customer !

Membership

南京三普造粒装备有限公司
Free Member ·1YRS
,
Other

Main Products: 造粒机

Xwboo>Products

南京三普造粒装备有限公司Free·1YRS

  • E-mail

    webmaster@sunup.com.cn

  • Phone

    86-25-52401353,52440171,52442586

  • Address

    Xishan Bridge, Yuhuatian District, Nanjing

Contact Now

TRG Series Counter Gear Rolling Granulator

Model
Nature of the Manufacturer
Other
Product Category
Wet Granulation
Place of Origin
City, Province
Overview
TRG Series Counter Gear Rolling Granulator
Product Details

Working principles:

The machine uses a pair of non-driving meshing gear as extrusion parts. Its working principle is positive displacement continuous extrusion. There are corresponding cylindrical through-holes in dedendum. The core of gear is hollow. Cylindrical through-holes directly connect with hollow part of the core from the dedendum. With the synchronous counter-rotating revolution, materials between two gears are uniformly filled in the tooth space while addendum of a gear forces materials inside the tooth space to the apertures at the dedendum, and extrudes the materials from inner wall of the core of the hollow gear. There is a slicer in the inner wall to cut strips of the materials, thus obtaining cylindrical particles with uniform length.

The machine is widely applied to granulation of more materials with high strength of particles and uniform length. The particles are cylindrical, and diameter of the particles ranges between 2.0 to 8.0 mm, with granulation rate of higher than or equal to 95%.

 

 

 

Scope of application:

The machine is widely applied to granulation of catalyst, auxiliaries, additives, daily chemicals, pesticides, etc

Main advantages:

• As the machine is rolled by gear, and materials are extruded through positive displacement compression. Therefore, the machine is widely applied to granulation of more materials, and granulation of thixotropic materials in particular.

• Built-in scraper contributes to particles with uniform length.

• Compared with screw extruder, the machine features lower water content in the materials required for the granulation, and higher strength of particles.

• The shortcoming of the machine is relatively low productivity of single machine.

Specification and model

 

Model
Pitch diameter(mm)
Driving power(kw)
TRG-100
100
7.5
TRG-180
180
15