Welcome Customer !

Membership

南京三普造粒装备有限公司
Free Member ·1YRS
,
Other

Main Products: 造粒机

Xwboo>Products

南京三普造粒装备有限公司Free·1YRS

  • E-mail

    webmaster@sunup.com.cn

  • Phone

    86-25-52401353,52440171,52442586

  • Address

    Xishan Bridge, Yuhuatian District, Nanjing

Contact Now

PRG Series Flat Die Plate Press Granulator

Model
Nature of the Manufacturer
Other
Product Category
Wet Granulation
Place of Origin
City, Province
Overview
PRG Series Flat Die Plate Press Granulator
Product Details

Working principles:

The working principles of the screw extruder is a kind of granulation method between dry process granulation and wet process granulation, therefore this granulation is also known as semi-dry process granulation. Materials are placed on the upper side of the formwork with apertures; principal axis drives rolling wheel to revolve while the rolling wheel revolves on its axis. The rolling wheel continuously presses material layer on the formwork with apertures. Materials are forced to be extruded from apertures in the diagonal triangle area formed between formwork and rolling roller. The cylindrical strips extruded below the formwork are cut by scraper (or are naturally broken), thus obtaining cylindrical particles. The diameter of the particles ranges between 2 to 40 mm, with granulation rate of higher than or equal to 95%. In the process of granulation, water content required for granulation of materials is less than water content required for screw extrusion while the particles strength is higher than that of screw extrusion.

 

 

Scope of application:

Typical applied materials: Activated carbon, carbon powder, pulverized coal, plant fiber, fermented waste, compound fertilizer, bio-fertilizer, additives, catalyst, pesticide, pot clay, lead oxide, zinc oxide, etc.

Main advantages:

• High granulation rate without screening and return of materials.

• Granulation requires less water content, featuring higher strength of particles, and lower secondary pulverization rate.

• As granulation requires less water content, the energy consumption in the follow-up drying process is less. Granulation of some materials doesn’t require drying.

• High productivity of single machine; maximum productivity of single machine reaches as high as 20,000 kg/hr.

 

 

Specification and model

 

 

Model
PRG-440
PRG-600
PRG-780
PRG-1000
PRG-1250
Diameter of formwork(mm)
440
600
780
1000
1250
Diameter of roller(mm)
190
260 or 280
260 or 280
350 or 450
450
Width of roller(mm)
82
88-102
88-102
156
156 or 192
Number of roller
2-4
3-4
3-5
3-5
3-5
Drive motor(kW)/(R/min)
15-30/1500
55-75/1500
90-110/1500
160-200/1500
200-250/1500
Linear speed of roller(m/s)
2.3
2.6
2.6
2.6
2.7
Aperture area(cm2)
759
1382
1724
3850
5900
Particles diameter(mm)
2-15
2-30
3-35
3-40
3-40
Productivity(kg/h)
250-800
2000-5000
4000-10000
6000-15000
8000-20000
Overall dimension(mm)
1600×824×1297
2235×1768×1720
2450×1400×2125
2885×1786×2360
3480×1920×2480
Total weight(kg)
1650
3250
6500
7200
9800