Applicable Sensors | Strain gages, Strain-gage transducers |
Input Channels | 4 |
Synchronous Measurement | Up to 4 units by 16 channels |
Applicable Gage Resistance | Quarter bridge system (2-wire or 3-wire): 120 Ω Half and full bridge systems: 120 Ω to 1000 Ω |
Input Connectors | 37-pin D-sub connector |
Bridge Power Supply | AC 2 V rms |
Gage Factor | 2.00 fixed |
Balance Adjustment | Resistance: Within ±2% (±10000 μm/m) Capacity: Within 5000 pF |
Balance Adjustment Methods | Resistance: Pure electronic auto balance method Capacity: CST method (Automatic tracking) |
Nonlinearity | Within ±0.1%FS |
Measurement Range | 200, 500, 1000, 2000, 5000, 10000, 20000 μm/m, 7 steps. Accuracy: within ±0.5%FS |
Frequency Response | DC to 200 Hz Deviation: within ±10% |
Sampling | Sampling Frequencies : Max. 10 kHz (Synchronous sampling of 4 units 16 channels) |
LPF | Transfer Characteristics : 2nd order Butterworth Cutoff Frequency : 10, 30, 100 Hz, and FLAT -4 steps Amplitude Ratio at Cutoff Point : -3±1 dB Attenuation : -12±1 dB/oct. |
A/D Resolution | 24 bits |
Holding Setting Conditions | 0.7 A or less (13 VDC) |
TEDS | Loading function from the TEDS sensor (Applicable input adaptors UI-10A and UI-11A) CH name writing function (For the manufacture ID: KYOWA only) |
Interfaces | USB2.0 (Compliant to the High-Speed, USB3.0 port supported) |
Stability | Temperature Zero point: within ±0.2 μm/m per ºC Sensitivity: within ±0.05%/ºC Time Zero point: within ±1 μm/m/8h. Sensitivity: within ±0.3%/8h. |
Withstand Voltage | |
Operating Temperature/Humidity | 0 to 40ºC, 20 to 85%RH (Noncondensing) |
Vibration Resistant | ±29.42 m/s2 (3 G), 5 to 200 Hz, (12 cycles for each axis, 10 minutes/cycle) |
Power Supply | DC 11 to 16 V Connector: RM12BRD-4PH (Hirose) |
Current Consumption | 0.7 A or less (12 VDC) |
Dimensions | 210 W x 35 H x 157.5 D mm (Excluding protrusions) |
Weight | Approx. 700 g |