Model | EDX-5000A-64-HE: Hard disk drive (HDD) , English EDX-5000A-64-SE: Solid state drive (SSD) , English |
Applicable Conditioner Cards | CVM-41A, CDV-40B(-F), DPM-42B(-F), DPM-42B-I(-F), CTA-40A, CFV-40A, CCA-40A(-F), CDV-44AS, CDA-44AS, CDA-45AS, AD-40AS(-F) |
Input Channels | Max. 64 (CDV-40B x 8) |
Analog Input | See specifications of respective conditioner cards for details. |
Digital I/O | I/O points: Max .8 I/O setting: Sets every bit to digital input, digital output, or remote-control input with the same common. *Remote-control input: Measuring start, stop, balance conducting, etc. Input modes: Isolated TTL Level input Input voltage: Max. 5 VDC Isolation modes: Digital isolation Output modes: Isolated open-collector output with 10 kohm built-in pull-up resistors Output voltage: 5 VDC Output current: Max. 25 mA per point |
Voice Input | 1 channel, to be recorded together with measuring data. An optional remote control unit RCU-42 is required. |
Sampling | Sampling Frequencies : 1-2-5 series 1 Hz to 200 kHz for up to 32-channel data acquisition 1 Hz to 100 kHz for up to 64-channel data acquisition 1 Hz to 50 kHz for up to 80-channel data acquisition 1 Hz to 10 kHz for real-time synchronous data processing 2n series 2 to 131072 Hz for up to 32-channel data acquisition 2 to 65536 Hz for up to 64-channel data acquisition 2 to 32768 Hz for up to 80-channel data acquisition 2 to 8192 Hz for real-time synchronous data processing The condition is using a 16-bit A/D converter, as for a 24-bit A/D converter, the channels above will be half of each channel. |
Storage | HDD model: 300 GB or more SSD model: 30 GB or more |
Display | Channel status LED (OVER value of every channel are settable), REC, BUSY, BATTERY, POWER LED 12.1" wide touch panel |
Operation Keys | Keys REC, STOP, BAL, and OPT are operated by touch panel, keys on EDX, external keyboard, or mouse |
Output Control connectors | CONT.IN, CONT.OUT (For remote control unit, or synchronous operation) |
External I/O Connectors | External Triggers: TRG IN, TRG OUT External clock: CLK IN, CLK OUT (Output at any frequency division ratio) |
External Interfaces | USB type keyboard, USB type mouse VGA connector for monitor USB I/F: 3 USB 2.0 in front, 2 USB 3.0 in rear LAN I/F: 100/1000BASE-T |
Power Supply | 100 to 240 VAC and 10 to 30 DC, dual supply Built-in batteries against momentary power failure |
Current Consumption | Approx. 1.8 A (For 100 VAC, CDV-40B x 8) |
Operating Temperature | 0 to 40 ºC |
Operating Humidity | 20 to 80% RH (Non-condensing) |
Storage Temperature | -20 to 60 ºC |
Vibration Resistant | EDX-5000A-64-H, EDX-5000A-64-S, 49.0 m/s2 (5 G), 5 to 55 Hz when not operating 29.4 m/s2 (3 G), 5 to 55 Hz when operating EDX-5000A-64-H: 9.8 m/s2 (1 G), 10 to 200 Hz when operating EDX-5000A-64-S: 19.6 m/s2 (2 G), 10 to 200 Hz when operating |
Impact Resistant | 196.1 m/s2 (20 G), 11 ms |
Dimensions | 365 W × 159 H × 300 D mm (Excluding protrusions) |
Weight | Approx. 11.5 kg (Mainframe only) |
Optional Functions | CAN data acquisition (Input channels: Max 512) GPS data acquisition (Tracing data acquisition, time synchronous function) |
Online Control | Controlled by DCS-100A |
EMC Directive | EN61326-1 (Class A) |
Low Voltage Directive | EN61010-1(Installation category II, Pollution degree 2) |
RoHS Directive | EN50581 |