operating principle
The manual sewage backwashing decontamination device (quick decontamination device) is divided into two types: straight type and angle type. The most advanced design principle is adopted, so that it has extremely low running resistance, and the pipeline system does not stop the sewage and does not need to set a bypass Features such as pipelines have unparalleled advantages of similar products. The normal filtering state of the dirt separator (Fig. 1), and the valve plate of the water flow guide valve are in full open state, the medium first enters the inside of the filter screen from the inlet, then enters the outside of the filter screen after filtering through the mesh, and then leaves the dirt separator from the outlet and enters the pipeline system; Backwash blowdown state of the dirt separator (Fig.2), and the valve plate of the water flow guide valve is in the closed state. When the valve outside the blowdown pipe is opened, the pressure difference between the medium inside the quick dirt separator and the outside of the blowdown pipe will be generated, and the flow direction of the medium will be changed. First, the medium will flow from the outside of the filter screen to the inside to play the role of backflushing, and the impurities and dirt will be discharged. During the blowdown process, most of the medium still enters the pipeline system from the outlet, and the system does not stop.

product feature
small resistance, Large capacity for pollution
Small floor area, easy to install on the pipeline
No need to set bypass when installing in pipeline system
Backwash and sewage at any time without stopping the system to ensure the normal operation of the system
Simple operation, convenient, easy to replace.
Set up a manual cleaning port, and the large particles that cannot be discharged from the outlet can be removed from the cleaning port without removing the dirt separator.
technical parameters
Maximum working pressure 1.6mpa(special specification can be ordered.)
Filtration accuracy 3500 μ m ~ 100 μ M
Working temperature: 0 ~ 150 ℃
Installation and commissioning
When the dirt separator is installed, a connecting pipe and a shut-off valve shall be set on both sides for facilitate the maintenance of the quick dirt separator
Pressure gauges should be installed on both sides of the dirt separator to monitor and observe the its blockage
During the installation of the quick dirt separator, the drain outlet shall be equipped with a shut-off valve and the drain pipe shall be led to the drainage ditch
The quick dirt separator can be installed horizontally or vertically. Pay attention to the installation direction when installing vertically.
technical specification sheet

JFKCZ(straight-through) manual blowdown backwash dirt separator (straight- through quick dirt separator)

JFKCJ (angle-through) manual blowdown backwash dirt separator (angle- through quick dirt separator)
