Product Feature
Fully automatic backwash, continuous flow during backwash
High filtration accuracy, large amount of water treatment
Self-cleaning relies on its own pipeline water pressure without external power;
Suitable for filtration of various water qualities, such as tap water, well water, surface water, circulating cooling water, etc.
Compact structure, easy installation and easy maintenance
Application of multilayer sintered mesh, good filtering effect, high strength and long life
operating principle
When filtering, the raw water enters the water inlet and passes through the filter, and the dirt slowly accumulates. This is the filtering process. The accumulation of dirt on the filter causes a pressure difference between the inlet and outlet. When the pressure difference reaches the set value, the system continues to supply water will trigger a series of actions: The drain valve is opened, the pressure in the hydraulic motor driving chamber is reduced, and water flows out through the drain pipe, the pressure drop in the driving chamber creates a suction force on the suction nozzle, the water flows through the hydraulic motor drives the suction pipe to rotate around the axis, so that the entire inner surface of the filter screen is significantly cleaned. For about 5 seconds during the flushing process, the drain valve closes at the end of the flushing process, the rising water pressure restores the system to its original position, the filter is ready for the next working process, and the filtered clean water is continuously supplied from the outlet to the rear stage during the cleaning process.

Structure Graphing

product application
| industry | apply | Filtration accuracy |
| Food, textile, electronics, foundry | System water filtration | 50-100um |
| spray-head nozzle | Agriculture, food, papermaking, metallurgy, machinery | 20-100um |
| drinking water | Municipal, tap water | ≤ 50um |
| Circulating cooling water Side filtering | Food processing, metallurgy, electricity, air conditioning, heating, etc. | ≤ 100um |
| Circulating cooling water Full filtration | ≤ 70um |
| Sewage treatment | Pulp, metallurgy, mining, papermaking, etc. | 5-100um |
technical parameters 
S- filter with increase type screen area
Filtration accuracy: 20-400 microns
System working pressure: 0.2-1.0Mpa;
Water pressure required for backwashing: ≥ 0.18Mpa;
Medium temperature: <60 degrees;
Power supply voltage: AC220V 1A
Control output voltage: DC24V 1A per channel;
Control mode: differential pressure, timing, manual;
Pipe material: carbon steel, stainless steel, HDPE, etc.