Welcome Customer !

Membership

Wuxi Tairan Environmental Protection Technology Co., Ltd
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Ozone generator|UV Sterilizer

Xwboo>Products

Wuxi Tairan Environmental Protection Technology Co., LtdFree·1YRS

  • E-mail

    164200835@qq.com

  • Phone

    0510-87896669

  • Address

    Environmental Protection Research Base, No. 9 Chengzhou Road, Gaocheng Town, Yixing, Jiangsu

Contact Now

Ozone concentration detector

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ozone generator
Place of Origin
WuXi City, JiangSu Province
Overview
Ozone concentration detector
Product Details

The ozone concentration sensor is mainly used for the detection of ozone concentration at the outlet of the ozone generator. It uses ultraviolet lamps as the light source system. The service life ismore than30,000hours. The measurement data is stable and high in accuracy. It adopts a double optical path optical cell structure, which has no leakage and pressure resistance. High, resistant to the impact of large flow sampling gas, easy to clean, easy to maintain, and simple to operate.During use, the equipment is manually zeroed to ensure the accuracy of concentration and avoid zero drift. It has4-20mAandRS-485signal output.

 

 This ozone concentration detector is mainly used for the concentration measurement at the outlet of the ozone generator, and can continuously detect the ozone concentration in the outlet pipeline of the ozone generator online.It is mainly used to continuously detect ozone gas in various industrial environments, and can also be used to detect ozone gas in operating pipelines, containers and other environments.It is used in the pharmaceutical, chemical, municipal, sewage treatment and other industries to measure the outlet concentration of the ozone generator and the output of the ozone generator.

 

        The zero calibration method of the ozone concentration sensor is manual zero calibration.Perform manual zero calibration after10 minutesofwarming up, and ozone cannot be introduced during zero calibration, so as not to affect the accuracy of zero calibration.After each zero calibration, the ozone source should be turned off and zero calibration should be performed.