Welcome Customer !

Membership

Wuxi Tairan Environmental Protection Technology Co., Ltd
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Ozone generator|UV Sterilizer

Xwboo>Products

Wuxi Tairan Environmental Protection Technology Co., LtdFree·1YRS

  • E-mail

    164200835@qq.com

  • Phone

    0510-87896669

  • Address

    Environmental Protection Research Base, No. 9 Chengzhou Road, Gaocheng Town, Yixing, Jiangsu

Contact Now

Small ozone generator

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ozone generator
Place of Origin
WuXi City, JiangSu Province
Overview
Small ozone generator
Product Details

1. Working principle

When the oxygen-containing gas passes through the discharge gap between the two electrodes, part of the oxygen molecules (O2) will be converted into ozone (O3) to achieve ozone production. When the high voltage electrode has a changing high voltage, a micro-discharge will be generated at the discharge gap between the electrodes. The oxygen molecules are decomposed into free oxygen atoms O, and part of the free oxygen atoms recombine with the undecomposed oxygen molecules. The generation of ozone (O3), namely O+O2=O3, is called "corona discharge" or "silent discharge". In fact, only part of the electric energy applied to the electrodes is used to produce ozone, and heat is also generated during the preparation process, and cooling water is required to effectively cool the ozone generating module. The ozone preparation process is obviously affected by the quality of the raw gas and the temperature of the cooling water. The lower the temperature, the higher the ozone preparation efficiency.


two. Ozone generator technical parameters

Product number

WGL-FW-100G

Product size (length * width * height cm )

55*45*125

Ozone production ( g/h)

100

Ozone concentration ( mg/L )

15-25

Ozone power consumption ( W)

1600

Input power

AC220V/50HZ

Working voltage ( KV)

3-7

Power frequency

>3000

Intake air flow (L/Min)

80-120L/min

Inlet pressure ( MPa )

0.3-0.8

Inlet temperature ( ℃ )

≤ 20

Air source dew (lu) point ( ℃ )

≤ 50

cooling method

Water cooling + air cooling

Cooling water temperature ( ℃ )

≤ 30

Cooling water inlet and outlet

   4 points of external teeth (or turn to 12mm outer diameter quick plug)

Ozone outlet

10mm quick screw

Cooling water volume (L/h)

1400

Working environment conditions

Ambient temperature ≤ 45 ℃, RH ≤ 80% , it is strictly prohibited to use in flammable and explosive places

Use air source

Air source

Machine configuration

Micro gap discharge ozone tube, high frequency and high voltage power supply, air compression pump, air filter, powerful cooling fan, control circuit (timer, working indicator, air pump switch, ozone switch, etc.)

main feature

1. Automatic work ( 16 sets of timing switch settings, time error ± 2 seconds / month), which can realize unmanned operation;

2. Manual work (free switch, switch can be used at any time, convenient for temporary use or experiment);


three. Method of operation

 The cooling water must be connected before the water-cooled ozone generator is connected to the power supply, and it is forbidden to operate the equipment without cooling water.

1. How to use water treatment

1.1. Place the ozone generator at a specific position (stable, dry, well ventilated and heat-dissipating) in the water treatment process, more than 40 cm away from the wall ; make sure that the ozone silicone tube is connected to the ozone outlet of the machine to deliver the ozone The pipe is connected to the ozone dosing device to facilitate the delivery of ozone.

1.2 The ozone generator must be higher than the water level to prevent water from flowing back into the ozone generator and causing damage to the components. If a check valve is purchased, please connect it to the ozone delivery pipeline. Reverse connection of the check valve is prohibited.

1.3 Turn on the power, the voltmeter displays the current voltage. Turn on the air pump switch, the air pump indicator light is on, the air pump starts to work, and the ammeter displays the current current. Turn on the ozone switch after 5 seconds, and then slowly adjust the ozone concentration knob to larger. The ozone output port has ozone output. After use, you need to adjust the ozone concentration switch to a lower position, then turn off the ozone switch, and turn off the air pump switch after 5 seconds.

2. How to use air disinfection

2.1: Place the ozone generator in a specific (stable, well-ventilated and heat-dissipating) position outside the room to be disinfected, make sure that the ozone silicone tube is connected to the ozone output port of the machine, and lead the ozone pipe into the space to be disinfected, and at 2 meters High dosing

2.2: In order to achieve a better effect of ozone disinfection, please close doors and windows, etc., and do not have people indoors during disinfection.

2.3: Turn on the power, the voltmeter displays the current voltage. Turn on the air pump switch, the air pump indicator light is on, the air pump starts to work, and the ammeter displays the current current. Turn on the ozone switch after 5 seconds, and then slowly adjust the ozone concentration knob to larger. The ozone output port has ozone output. After use, you need to adjust the ozone concentration switch to a lower position, then turn off the ozone switch, and turn off the air pump switch after 5 seconds.

1. Ozone tube: Ozone discharge chamber features: the inside of the discharge chamber is combined with multiple sets of discharge tubes, which is close to a honeycomb structure when viewed from the side. It is commonly known as a honeycomb tube in the industry. The inner and outer electrodes of the discharge tube are made of 316L stainless steel, and the outer shell is 304 stainless steel. The dielectric material is made of high purity. silica quartz tube 99.8% , polytetrafluoroethylene and fluorine rubber sealing original combination, an outer water-cooled electrode, is greater than the design life . 5 million hours. Fives. Product structure (advantages of configuration technology)

2. High-frequency and high-voltage power supply: Composition and characteristics of high-voltage power supply: military-grade variable-frequency and variable-voltage PCB circuit and vacuum epoxy high-voltage package; the main characteristics are: IGBT drive, bandwidth automatic / manual, slow start , (limit surge current ), the power supply over-voltage protection . The power converter overheat protection, output short circuit protection, sound and light warning . circuit interference , moisture, corrosion design, and can be flexible according to customer requirements as the PLC ( 0 ~ 5V goods . 4 ~ 20mA ) Different setting function of control or power supply voltage, normal service life is more than 12K hours.

Four, product features

1. High-voltage discharge generator

This type of ozone generator uses a high-frequency power supply system to make an electrochemical reaction of oxygen molecules in or around the electric field to produce ozone. The ozone generator has the advantages of mature technology, stable operation, long service life, and large ozone output, so it is a widely used ozone generator in related industries at home and abroad.
2.
Ozone safe cooling method

When the ozone generator is working, it will generate a lot of heat energy and needs to be cooled, otherwise the ozone will be decomposed due to the high temperature. The water-cooled generator has good cooling effect, stable operation, no ozone attenuation, and can work continuously for a long time.

3. Ozone generator discharge technology

Quartz tubes are often used by some high-performance ozone generators because of their high dielectric constant, uniform wall thickness, good ovality, high temperature resistance, and moisture resistance. The ceramic plate is easy to be brittle and only suitable for some small generators. The wall thickness and ellipticity of ceramic tubes are not easy to control, and the problem of uneven discharge is prone to occur, so they are not used much. Glass tube and enamel tube have low dielectric constant, poor high temperature resistance, and easy to burst.