1. Product overview
According to Lambert - Beer's law, this ozone concentration analyzer calculates the current ozone concentration value by measuring the changes in the optical signal intensity before and after the absorption of ultraviolet light by ozone. The equipment uses an advanced dual-light path ultraviolet light source system, equipped with a lamp intelligent management system, and the ultraviolet lamp can quickly reach the measurement state after it is turned on. It adopts German separate light cell technology, and the equipment has no leakage, high pressure resistance, and high resistance. Flow sampling gas shock, easy to clean, easy to maintain, simple to operate, low cost of use and other characteristics.
The equipment will automatically purge the zero point every 1 hour to ensure the stability of the zero point and prevent the zero point drift from affecting the accuracy of the detection concentration. The gas flow, pressure, and flow rate remain unchanged during the zero calibration to prevent the impact of the airflow from affecting the zero calibration. The equipment can run continuously 24 hours a day .
Application fields: ozone generator manufacturers, municipal water industry, industrial sewage industry, fine chemical industry food and drinking water industry, space disinfection industry, swimming pool disinfection industry, fragrance synthesis industry and other industries that use ozone generators.
A filter or dehumidifier must be installed on the air inlet of the ozone detector, and the air must be clean and dry. It is strictly forbidden to connect the outlet of the catalytic converter back to the main line! (This analyzer has been equipped with an ozone intake filter as standard).
2. Product technical parameters
Measuring range: 0-200g/m 3 ;
Display resolution: 0.01g/m 3 ;
Pump suction gas flow: 1.0L ± 0.2L/min ;
Input pressure: <0.1MPa ;
Zero drift: < ± 0.1%.FS ( MAX : ± 0.2 g/m 3 )
Sampling port diameter: Φ 6 ( 6mm*4mm )
Detection accuracy: ± 3% of reading
Communication method: RS-485 ;
Output mode: 4-20mA , linear;
Power supply: AC 110-220V ;
Size: 155*78*240mm;
Hole size: 145*68 ;
Note: 1mg/L=1g/m 3 =467PPM
Weight: 2kg ;
3. Product technical features
Measuring principle: According to Lambert - Beer law, accurate measurement by photometric absorption principle;
Test method: dual optical path ultraviolet light absorption method , high measurement accuracy;
Light source system: German long-life ultraviolet lamp (wavelength 253.7nm );
Optical cell system: German separated optical cell technology, no leakage, high pressure resistance, and large flow sampling gas impact resistance;
Intelligent compensation: built-in light source automatic compensation function;
Automatic calibration: every 1 h Equipment automatic zero 1 times to ensure the stability of the zero point, to ensure the accuracy of the detected concentration.
Data display: high-definition digital backlight display, clear and countable data;
Output function: 4-20mA current signal, RS485 communication;