Welcome Customer !

Membership

Wuxi Tairan Environmental Protection Technology Co., Ltd
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Ozone generator|UV Sterilizer

Xwboo>Products

Wuxi Tairan Environmental Protection Technology Co., LtdFree·1YRS

  • E-mail

    164200835@qq.com

  • Phone

    0510-87896669

  • Address

    Environmental Protection Research Base, No. 9 Chengzhou Road, Gaocheng Town, Yixing, Jiangsu

Contact Now

Ozone water disinfection machine

Model
Nature of the Manufacturer
Manufacturer
Product Category
Ozone generator
Place of Origin
WuXi City, JiangSu Province
Overview
Ozone water disinfection machine
Product Details

Ozone generator technical parameters

Product number

KMJ-O3YSX-50

Product size (length * width * height cm )

55*40*80

Ozone production ( g/h)

50

Ozone concentration ( mg/L )

80-100mg/L

Ozone power consumption ( W)

1600

Input power

AC220V/50HZ

Working voltage ( KV)

3-7

Power frequency

>3000

Intake air flow (L/Min)

1-10L/min

Inlet pressure ( MPa )

0.1-0.2

Inlet temperature ( ℃ )

≤ 20

Air source dew ( lu ) point ( ℃ )

≤ 50

Cooling water temperature ( ℃ )

≤ 30

Cooling water inlet and outlet

       10mm pagoda

Gas source import and export

10mm quick screw

Cooling water volume (L/h)

1400

Working environment conditions

       Ambient temperature ≤ 45 ℃, RH ≤ 80% , it is strictly prohibited to use in flammable and explosive places

Use air source

The equipment comes with an oxygen generator, and the oxygen purity is above 93%

Machine configuration

      Double-tower compression-adsorption oxygen generator, micro-gap discharge ozone tube, high-frequency high-voltage power supply, air compression pump, air filter, stabilized power supply, cooling fan, control circuit (timer, working indicator, air pump switch, ozone switch Wait)

main feature

      1. Automatic work ( 16 sets of timing switch settings, time error ± 2 seconds / month), which can realize unmanned operation;

      2. Manual work (free switch, switch can be used at any time, convenient for temporary use or experiment);


three. Method of operation

■ The cooling water must be connected before the water-cooled ozone generator is connected to the power supply. It is forbidden to run the equipment without cooling water

1. How to use water treatment

1.1.: Place the ozone generator at a specific position (stable, dry, and well ventilated) in the water treatment process, more than 40 cm away from the wall ; check whether the ozone silicone hose is connected to the ozone outlet of the machine, Connect the ozone delivery pipe to the ozone dosing device to facilitate ozone delivery.

1.2: The ozone generator must be higher than the water level to prevent water from flowing back into the ozone generator and causing component damage. If a check valve is purchased, please connect it to the ozone delivery pipeline. Reverse connection of the check valve is prohibited.

2. How to use air disinfection

2.1: Place the ozone generator in a specific (stable, well-ventilated and heat-dissipating) position outside the room to be disinfected, check whether the ozone silicone hose is connected to the ozone output port of the machine, and introduce the ozone pipe into the space to be disinfected. And add it at a height of 2 meters

2.2: In order to achieve a better effect of ozone disinfection, please close doors and windows, etc., and do not have people indoors during disinfection.


Four. Product structure (advantages of configuration technology)

1. Ozone tube: The dielectric material is made of high-purity dehydroxylated quartz tube, the dehydroxylation is less than 10ppm , the SiO2 content is more than 98% , the temperature resistance is 1600 degrees, and the pressure resistance is 30KV , which is much higher than the matched high-frequency and high-voltage power supply. The peak high voltage of 7KV produced will not be burnt down by high voltage breakdown. Inner electrode: 316L stainless steel tube, new material grade : 022Cr17Ni12Mo2 , corrosion resistance is better than 304 stainless steel, in the case of high-voltage and high-frequency continuous discharge , it will not be oxidized, blackened, rusted and deformed after 5 years of use ; discharge gap: 0.5MM ; sealed Head material: PVDF plug and fluorine rubber ring, anti-oxidation and acid-base resistance, the service life can reach 8 years. 


2. High-frequency high-voltage power supply: rectifier frequency conversion circuit, high-voltage package is composed of ferrite core, polyesterimide / polyamideimide composite layer enameled wire, epoxy high temperature glue vacuum potting, with open circuit protection, overcurrent Over-voltage protection, short-circuit protection, high-voltage frequency 3~20KHZ , output sine wave waveform, convert electric energy to a great extent, power factor can reach 0.97 .

Five, product features

1. High-voltage discharge generator

This type of ozone generator uses a high-frequency power supply system to make an electrochemical reaction of oxygen molecules in or around the electric field to produce ozone. The ozone generator has the advantages of mature technology, stable operation, long service life, and large ozone output, so it is a widely used ozone generator in related industries at home and abroad.

2. Ozone safe cooling method

When the ozone generator is working, it will generate a lot of heat energy and needs to be cooled, otherwise the ozone will be decomposed due to the high temperature. The water-cooled generator has good cooling effect, stable operation, no ozone attenuation, and can work continuously for a long time.

3. Ozone generator discharge technology

Quartz tubes are often used by some high-performance ozone generators because of their high dielectric constant, uniform wall thickness, good ovality, high temperature resistance, and moisture resistance. The ceramic plate is easy to be brittle and only suitable for some small generators. The wall thickness and ellipticity of ceramic tubes are not easy to control, and the problem of uneven discharge is prone to occur, so they are not used much. Glass tube and enamel tube have low dielectric constant, poor high temperature resistance, and easy to burst

4. Working principle

When the oxygen-containing gas passes through the discharge gap between the two electrodes, part of the oxygen molecules ( O2 ) will be converted into ozone ( O3 ) to achieve ozone production (see Figure 1 ). When the high voltage electrode has a changing high voltage, a micro-discharge will occur at the discharge gap between the electrodes. The oxygen molecules are decomposed into free oxygen atoms O , and some of the free oxygen atoms recombine with the undecomposed oxygen molecules. The generation of ozone ( O3 ), namely O + O2 = O3 , is called "corona discharge" or "silent discharge". In fact, only part of the electric energy applied to the electrodes is used to produce ozone, and heat is also generated during the preparation process, and cooling water is required to effectively cool the ozone generating module. The ozone preparation process is obviously affected by the quality of the raw gas and the temperature of the cooling water. The lower the temperature, the higher the ozone preparation efficiency.

5. Ozone process

The ozone generator system consists of: air source system, ozone generator host.

6. This product adopts double-ball bearing fan, high speed and large air volume to ensure good heat dissipation of the internal heating elements of the machine, low ozone concentration attenuation rate, and long-term use to ensure sufficient ozone production and up to standard concentration.

7. This product uses a silent oil-free compressor, a built-in cold-dry filter system, and a PSA oxygen generator, which can efficiently and stably provide high-purity oxygen to the ozone generator. The ozone concentration produced is high, up to 80MG/L , suitable for For the production of high-concentration ozone water, difficult wastewater treatment, bleaching and decolorization, etc.

8. Ozone is a broad-spectrum sterilization and has a strong killing effect on all kinds of bacteria and viruses. The generated ozone gas has strong oxidation and catalysis. Viruses and bacteria in the ozone gas are affected by a variety of free radicals, which dissociate and denature proteins, reduce the activity of nucleic acids and enzymes, thereby disinfecting and purifying the air; ozone It has complex physical and chemical reactions such as degradation and oxidation with formaldehyde, carbon dioxide, xylene and other toxic and harmful gases, and the by-products are non-toxic and harmless, which can avoid secondary pollution.