Welcome Customer !

Membership

Fuzhou Fuguang Water Science&Technology Co.,Ltd
Free Member ·1YRS
FuZhou,FuJian
Manufacturer

Main Products: Ammonia Nitrogen Analyzer|Chlorine Dioxide Analyzer/Residual Chlorine Analyzer|Hardness Tester Ammonia Nitrogen Analyzer|Chlorine Dioxide Analyzer/Residual Chlorine Analyzer|Hardness Tester

Xwboo>Products

Fuzhou Fuguang Water Science&Technology Co.,LtdFree·1YRS

  • E-mail

    fgwater@fuguang.com

  • Phone

    400-668-8627

  • Address

    ADD:Building B, Chenxing Science and Technology Park, No. 168, Jinyan Road, Cangshan District, Fuzhou City, Fujian Province

Contact Now

HACH BIOTECTOR B3500e TOC (Total Organic Carbon) Analyzer

Model
Nature of the Manufacturer
Manufacturer
Product Category
TOC Analyzer
Place of Origin
City, Province
Overview
HACH BIOTECTOR B3500e TOC (Total Organic Carbon) Analyzer
Product Details
Ultra high cost performance: To achieve the highest reliability of TOC analysis in the water treatment industry, and the cost is extremely low.
 
Hach® BioTector B3500e uses industry-leading patented self-cleaning technology to achieve accurate online TOC analysis. After verification, the B3500e has a total normal operating rate of 99.86%, ensuring reliable measurement results and highest availability. Ideal for the water treatment industry, the B3500e can help you meet various standards while minimizing operating costs.
 
Meet environmental requirements
 
The B3500e is specifically designed to monitor the discharge of wastewater treatment plants to meet the TOC requirements in water regulations. Complying with the requirements of relevant laws and regulations can not only save you a large amount of penalties for overruns, but also protect the local environment.
 
Very low cost of ownership
 
The pump tubing can be replaced by itself and only needs to be calibrated twice a year to ensure lower maintenance costs for the Hach BioTector B3500e.
 
Intelligent design, worry-free TOC monitoring
 
The B3500e is equipped with a built-in self-cleaning sample tube and reactor to ensure that even if the water sample contains a certain amount of fat, grease, sludge or slight pH fluctuations, the B3500e can still provide reliable and reliable measurement results.
 
Trusted monitoring information
 
Using BioTector's patented advanced secondary oxidation technology that has been proven in practice worldwide, the B3500e can guarantee maximum uptime, highest reliability, and accuracy.
 
Enjoy measurement results anytime, anywhere
 
With the B3500e analyzer, you can remotely view TOC results through the BioTector network control device in the office, at home, or outdoors.
 
Principle of operation
 
TIC
 
Acid is added to lower the pH, so that the inorganic carbon is purged out as CO2. The purpose of testing total inorganic carbon (TIC) is to ensure that it is not brought into the TOC.
 
Oxidation
 
BioTector's patented oxidation method (TSAO) is used to achieve complete and complete oxidation of samples, including the conversion of organic carbon to CO2. TSAO uses hydroxyl radicals generated by sodium hydroxide combined with oxygen passing through an ozone generator as an oxidant.
 
TOC
 
In order to remove CO2 generated by oxidation, the pH of the sample needs to be lowered again. CO2 is purged out and measured by a specially developed NDIR CO2 detector. The results are displayed in total organic carbon (TOC).
 
clean
 
The entire system will automatically clean itself during each measurement cycle through the reaction process.
 

sizetop view


Side view

Scan the QR code to read on your phone
Technical index
Measurement parametersMeasure TOC, TIC and TC
Range0-250 or 0-1000 mg / L C
Range selectionAutomatic or manual range selection
Repeatability± 3% of reading or ± 0.45 mg / L C (ppm), whichever is greater
communicationModbus, Profibus, Ethernet and Internet network control
User InterfaceMicrocontroller with membrane keyboard
DisplayHigh contrast 40 × 16 LED backlit LCD display
Measurement methodsDetermination of CO2 by infrared measurement after oxidation
Sample temperature0 to 60 ° C (36 to 140 ° F)
Oxidation method
Patented Advanced Secondary Oxidation Method (TSAO) using hydroxyl radicals
 
Ambient temperature5 to 40 ° C (41 to 113 ºF)
humidity5 to 85% (no condensation)
Maintenance cycleMaintenance every six months
Number of channelsSingle channel and manual sampling
Power requirements (voltage)230 VAC
Power requirements (Hz)50/60 Hz
circulation timeUsually 7 minutes and 30 seconds
Over-standard trackingOver-standard tracking concentration range up to 1,000 mg / L C
Particle sizeMax. 100 µm
Automatic cleaningYes
data storage
Top 9,999 response data
Top 99 error messages
weight46 kg (101.41 lbs)
Dimensions (Height x Width x Depth)750 mm x 500 mm x 320 mm