Welcome Customer !

Membership

Shanghai Nuoyu Testing Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 分析仪器

Xwboo>Products

Shanghai Nuoyu Testing Technology Co., Ltd.Free·1YRS

  • E-mail

    nuoyusales@pannatek.com

  • Phone

    400-1030-696

  • Address

    Building F,Zhichuang Guigu, No.438 Xinlai Road,Jiading District,Shanghai

Contact Now

Online total mercury

Model
Nature of the Manufacturer
Other
Product Category
Water Quality Analyzer
Place of Origin
City, Province
Overview
Online total mercury
Product Details

Total mercury on-line automatic analyzer is an optical heavy metal on-line analyzer designed according to national environmental protection standards, which is applied to simultaneous on-line analysis of various heavy metal elements in surface water, industrial process water and industrial wastewater. The measured heavy metal elements include Class I and Class II heavy metal prevention and control projects in the 12th Five-Year Plan for Comprehensive Prevention and Control of Heavy Metal Pollution of the Ministry of Environmental Protection. Measurement principle: Acidification digestion at high temperature converts all forms of mercury (including different valence states, organic states, complex states, etc.) into the same valence state, and measures the total content of mercury in surface water and industrial wastewater by color development after masking other interfering ions. The measurement results meet China's national standards

0471dadc9a4b76217c1266bd9c09abe.png

 

 The unique design makes this product have lower failure rate, lower maintenance, lower reagent consumption and higher cost performance than similar products. 1-select valve assembly: select reagent sampling sequence, with flexible channels, varied functions, minimum dead volume, easy maintenance and long service life. 2-Micro-metering component: Accurate metering of reagents is realized by visual photoelectric system, which overcomes the quantitative error caused by wear of peristaltic pump tube; At the same time, the accurate quantification of trace reagents was realized, and each dose was only 1 ml, which greatly reduced the amount of reagents used. 3-Sample injection component: peristaltic pump sucks under negative pressure, and there is always an air buffer zone between reagent and pump pipe, which avoids the corrosion of pump pipe; Meanwhile, the reagent mixing is simpler and more flexible. 4-Sealed digestion component: high temperature and high pressure digestion system accelerates the reaction process and overcomes the corrosion of equipment caused by volatilization of corrosive gas in open system. 5-Reagent tube: Imported modified PTFE transparent hose with a diameter greater than 1.5mm is adopted, which reduces the probability of clogging of water samples.

 

Methodological basis

Ultraviolet spectrophotometry with alkaline potassium persulfate digestion

1e7cb8b23e2a8c5aa41bccceb919ebf.png

measuring range

0-500mg/L

temperature

0~60℃

precision

≤0.5mg/L:±0.05mg/L

resolution ratio

0.01mg/L

repetitiveness

±5%

Measurement period

It can be set in 5 ~ 120 min

Power Supply 

220V±10% 50±1 Hz

 

Calibration period

Adjustable at any time at any interval from 1 to 99 days

Maintenance cycle

Generally, once a month, each time about 30 minutes

output

RS-232 or 4-20mA or RS485

Enclosure size

Height 1500× width 550× depth 450(mm)

environmental requirement

In the room with adjustable temperature, the recommended temperature is+5 ~ 28℃; Humidity ≤90% (no condensation). For indoor use, air conditioning must be turned on. Suggested size of station building is 15m²

other

Abnormal alarm and power failure will not lose data