Total arsenic on-line automatic analyzer is an optical heavy metal on-line analyzer designed according to national environmental protection standards, which is applied to simultaneous on-line analysis of various heavy metal elements in surface water, industrial process water and industrial wastewater. The measured heavy metal elements include Class I and Class II heavy metal prevention and control projects in the 12th Five-Year Plan for Comprehensive Prevention and Control of Heavy Metal Pollution of the Ministry of Environmental Protection. Measurement principle: arsenic molybdenum blue spectrophotometry. After the water sample is digested by acid at high temperature and then mixed with the regulator, the arsenic in the sample reacts with the indicator in acidic environment and in the presence of the indicator to form a colored complex. The analyzer detects the color change and converts the change into the total arsenic value for output. The amount of colored complex produced is equivalent to the total arsenic amount.

Features of the instrument: The unique design makes this product have lower failure rate, lower maintenance, lower reagent consumption and higher cost performance than similar products. 1-select valve assembly: select reagent sampling sequence, with flexible channels, varied functions, minimum dead volume, easy maintenance and long service life. 2-Micro-metering component: Accurate metering of reagents is realized by visual photoelectric system, which overcomes the quantitative error caused by wear of peristaltic pump tube; At the same time, the accurate quantification of trace reagents was realized, and each dose was only 1 ml, which greatly reduced the amount of reagents used. 3-Sample injection component: peristaltic pump sucks under negative pressure, and there is always an air buffer zone between reagent and pump pipe, which avoids the corrosion of pump pipe; Meanwhile, the reagent mixing is simpler and more flexible. 4-Sealed digestion component: high temperature and high pressure digestion system accelerates the reaction process and overcomes the corrosion of equipment caused by volatilization of corrosive gas in open system. 5-Reagent tube: Imported modified PTFE transparent hose with a diameter greater than 1.5mm is adopted, which reduces the probability of clogging of water samples.
Technical parameters:
Methodological basis | Arsenic molybdenum blue spectrophotometry | 
|
measuring range | 0.00-3.00 mg/L |
temperature | 0~60℃ |
precision | <10% |
resolution ratio | 0.01mg/L |
repetitiveness | ±5% |
Measurement period | It can be set in 5 ~ 120 min |
Power Supply | 220V±10% 50±1 Hz |
Calibration period | Adjustable at any time at any interval from 1 to 99 days |