Principle introduction:
The suspended matter/sludge concentration sensor is based on the combined infrared absorption scattering light method. The infrared light emitted by the light source is scattered by the suspended particles in the sample, and finally converted into an electrical signal by the photoelectric detector, and the suspended matter/sludge concentration value of the sample is obtained after analog and digital signal processing.

Features of the instrument:
the sensor adopts double-beam infrared scattering light photometer detection technology, which has good repeatability and stability; ISO7027 standard method (infrared light scattering technology) can eliminate the influence of sample color; Built-in self-diagnosis function to ensure accurate data; The automatic cleaning function of cleaning brush can be selected, which greatly reduces the maintenance of sensor; Digital sensor with strong anti-interference ability and long transmission distance; Standard digital signal output, which can realize integration and networking with other equipment without transmitter; Sensor power supply reverse connection protection sensor RS485 A/B terminal wrong connection power supply protection
Typical application: on-line monitoring of suspended solids/sludge concentration in each process of sewage treatment plant; On-line monitoring of suspended solids/sludge concentration in water and wastewater treatment processes of various industrial production processes
Technical parameters:
measuring range | 0.01-20000mg/L,0.01-45000mg/L,0.01-120000mg/L |
measurement accuracy | Less than 5% of the measured value (depending on sludge homogeneity) |
repetitiveness | ±2% |
resolution ratio | 0.01~1 mg/L,Depending on the range |
pressure range | ≤0.4Mpa |
flow rate | ≤2.5m/s、8.2ft/s |
calibrate | Sample calibration, slope calibration |
Main material of sensor | Fuselage: SUS316L (normal version), titanium alloy (seawater version); Upper and lower covers: POM, cable: PUR |
Power Supply | 12VDC |
protocol | MODBUS RS485 |
Working temperature | 0 to 45℃ (no ice) |
measure | Sensor: diameter 60mm* length 256mm |
weight | Sensor: 1.65KG |
the protection grades | Sensor: IP68/NEMA6P |
Cable length | Standard 10-meter cable can be extended to 100 meters |