Hdfq-1800 computer controlled gantry high speed Slitter
I. parameters:
1. Applicable materials: all kinds of web paper, kraft paper, special paper, coated paper, silicone oil paper, release paper
2. Cutting width: 100-1700mm
3. Effective width: 500-1800mm
4. Mechanical speed: 400m / min
5. Cutting speed: 350m / min (depending on cutting material)
6. Cutting and alignment accuracy: ≤± 0.10 mm
7. Evenness of the end face of the cutting tray: ≤ ± 0.20mm
8. Unwinding diameter: ≥ 1000mm
9. Unwinding and locking: inflatable shaft loading: 3 ", 6"
10. Unwinding motor: 7.5 * 2 three-phase asynchronous servo motors
11. Winding diameter: 2 * 〝800mm
12. Winding and locking: 3 "inflatable shaft
13. Winding tension: automatic taper tension control
14. Main motor: 5.5kW three-phase asynchronous servo motor
15. Winding motor: 11kw * 2 three-phase asynchronous servo motors
16. Exhaust fan: 2.2kW high-pressure three-phase AC fan, waste suction mode
17. Overall power: 45KW
18. Deviation correction range: 100mm
19. External dimension: 8000 × 4800 × 2200mm (H)
20. Machine weight: about 6500kg
21. Working power supply: 380V ± 10% 50Hz ± 5%, three-phase five wire power supply.
Compressed air: clean, > 0.6MPa. Relative humidity of installation environment: 60% maximum.
Ambient temperature: 40 ° C max.
II. Configuration:
1) unwinding part: hydraulic lifting unwinding structure.
1. Effective unwinding width: 500mm-1800mm
2. Unwinding diameter: 1, 000mm
3. Unwinding and locking: Φ 3 ", Φ 6" inflatable shaft
4. Maximum tension: 50kg
5. Unwinding tension: motor braking, PLC joint control, with taper and dynamic automatic control.
6. Deviation correction system: LPC deviation correction system is adopted, sensor is used for side line detection, and electric actuator is used for driving.
7. Moving mode: linear bearing and platform moving.
8. Mechanical structure: steel plate
9. Loading locking: Pneumatic
2) traction part: pneumatic roller traction system
1. Traction motor: 5.5kW three-phase asynchronous servo motor
2. Transmission mode: synchronous belt transmission
3. Working mode of press roll: pneumatic press roll, dynamic and static balance treatment
4. Main traction roller: adopt ¢ 200mm hard chrome plated mirror roller, dynamic and static balance treatment
5. Meter and speed calculation of encoder, NEMICON company
3) cutting part: circular cutter system with swing pressure cutter structure
① upper round knife: ¢ 105mm (also straight knife cutting)
(2) lower round knife: ¢ 105mm, using spacer to match the knife
③ active mode: synchronous belt drive
4) exhaust system: adopt 2.2kW high-pressure three-phase fan to absorb waste
5) winding system: independent driving double shaft structure, with double tension mode of center surface.
1. Winding diameter: 2 × 10 800mm, end tidiness ≤ ± 0.20mm
2. Winding shaft: the inflatable shaft is 3 "to swing the unloading structure.
3. Maximum tension: 50kg
4. Winding tension: it is controlled by motor torque, with self-control of winding tension taper and operation dynamic tension control function.
5. Winding power: driven by 11kw * 2 three-phase asynchronous servo motor
6. Frequency converter: 11kw * 2, PLC joint control.
7. Winding drive: adopt arc tooth synchronous belt drive
8. Pressure structure: constant pressure mode, controlled by precision pressure regulating valve.
7) main control system: the main control unit is composed of PLC and weinview human-machine interface
8) low voltage appliance: Chint appliance
9) pneumatic components: adek
10) rolling element: C3 level inlet
11) transition guide roller: Φ 100mm duralumin alloy aluminum roller, dynamic and static balance treatment, hv700 type
III. main configuration list
Product name | Specification type | brand |
Computer cutting machine | HDFQ-1800 | LiCheng |
PLC programmable controller | S200 | Siemens |
Touch screen | 10" | WEINVIEW |
Modular |
| Siemens |
Asynchronous servo motor and drive motor | | Beauty Department |
Frequency converter | | YASKAWA |
Rectify deviation | Ultrasonic detector | Tung Deng |
Pneumatic components | | AirTAC |
Rolling element | C3 (power level) | Imported |
Slitting mode | Straight or round knife | |
Inflatable shaft | | Homemade excellence |
Synchronous belt | | Italy production |
Flat leather belt | | Italy production |
Linear guideway 25 | | Imported |
Electric control proportional valve | | SMC |
Precision pressure regulating valve | | Imported |
Button switch | | Schneider |
Charging device | Automatic loading without shaft or with shaft | |