Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>How to use frequency converter in combination with automation and PLC?

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
How to use frequency converter in combination with automation and PLC?
Date: 2022/11/3Read: 39

How to use frequency converter in combination with automation and PLC?

Nov 17, 2021

How to use frequency converter in combination with automation and PLC?

Today, you will learn about VFD. Specifically, you will learn what a VFD is and when to use it in conjunction with automation and PLC.


So what exactly is a VFD?


VFD stands for variable frequency drive, which is used to run AC motors at variable speeds or increase the speed to make them start smoothly. Some people simply call them drives.


The working principle of VFD is to adjust the speed by adjusting the frequency of the motor. The VFD actually converts the voltage twice:


1. First, the three-phase alternating current is converted into direct current, which is achieved by diodes.


2. Then clean the direct current with a capacitor.


3. Next, the direct current is converted to alternating current, which is achieved by the transistor acting as a switch.


Using these "switches" allows the VFD to adjust the frequency provided by the VFD to the motor, which in turn controls the speed of the motor.



The amount of information is so large that it may be difficult to understand. Now compare the internal working principle of the VFD with a simple piping system, and explain the internal working principle of the VFD in an easy-to-understand manner.


The diode that converts alternating current to direct current works like a check valve in a water system. A check valve is like a charged diode, which only allows water to flow in one direction. The capacitor acts as a water filter to keep it clean and ensure availability. Transistors act like valves, they open and close flow when needed.



Now that we have understood the working principles of VFDs, let's take a look at their uses.


A very common use in industry is to control the speed of water pumps in water treatment facilities. Water treatment plants usually have a constant flow of water entering the plant. However, if the water demand of the factory is lower than the water supply entering the factory, the operator will need to slow down the water supply. This can be achieved by using a VFD on an AC motor. The operator can monitor the water flow and manually adjust the VFD accordingly.



Another advantage of VFD is that they can be controlled by PLC, and PLC can use VFD to monitor and control motor speed. A process such as water treatment can make it easier and more effective. As long as it can benefit, this setting can be used in any automation.