Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>What is the appropriate starting voltage setting for the soft starter?

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
What is the appropriate starting voltage setting for the soft starter?
Date: 2022/11/4Read: 32

What is the appropriate starting voltage setting for the soft starter?

Oct 22, 2021

What is the appropriate starting voltage setting for the soft starter?

When we use the soft starter, it is mainly based on its main parameters to carry out the overall setting, in the later use process to deal with, install and use, the following describes the soft starter parameter setting instructions.


1. Most soft starters can adjust the initial voltage. Because the initial voltage determines the initial torque, the initial voltage is set according to the load torque. If the setting is too small, it cannot be started or the start-up time is too long; if the setting is too high, the start-up will cause mechanical shock. And the starting current is too large; no-load starting, set the starting voltage to 20%-40% of the rated voltage, medium-load and heavy-load starting, the starting voltage can be set to 40%-70% of the rated voltage.


  2. Start-up time and parking time setting: The start-up time is usually set at about 10S, and the parking time is usually set within 20S.


3. Other parameter settings: some soft starters can set the starting torque curve, and adjust the voltage method to make the torque start and stop according to the set torque curve; some soft starters have the setting of starting current limit, and the adjustment current is 10%-50% of rated starting current; there is electronic overload protection in the soft starter, and the trip level can be adjusted to 10/10A/20 or 30 according to the nature of the load. In short, debug according to the actual requirements of the load. Nor can it be considered that the soft starter is limited to the function of limiting the starting current.


   Generally, during the use of the soft starter, the overall parameters of the soft starter are set according to the use environment and the current required by the entire production line, and the subsequent use is done.