Welcome Customer !

Membership

Zhejiang Saikong Electrical Technology Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 变频器

Xwboo>Technical Article>What is the core principle of using a frequency converter to achieve constant pressure water supply?

Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    amy@safeinvert.com

  • Phone

  • Address

    #22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China

Contact Now
What is the core principle of using a frequency converter to achieve constant pressure water supply?
Date: 2022/11/4Read: 35

What is the core principle of using a frequency converter to achieve constant pressure water supply?

Jul 14, 2021

What is the core principle of using a frequency converter to achieve constant pressure water supply?

How PID works in the frequency converter is also the core principle of the frequency converter to realize constant pressure water supply.

The input refers to the debugging of the target water level of 1 meter, the output refers to the actual water level, the actuator is human, and the measuring element is human eyes. This PID adjustment process is our water adding mechanism. Of course, this is our artificial implementation. If no one is involved and all are automated, then the meaning of these executive components will be different.

For example, in a variable frequency and constant pressure water supply system, it becomes like this: the input is the target pressure, that is, the pressure we need to set, and the pressure is set as much as you need in your pipeline. For the special frequency converter for constant pressure water supply, the target pressure can be set directly, and the operation is very simple. Generally, you can directly press the key on the panel.

If it is done with a general-purpose inverter, there will be an additional conversion process, which will be a little troublesome. I will explain how to convert in detail in this later course, but I won't explain it here. Their essence is the same, that is, you have to set a target pressure first.

Looking at the output again, the output is the actual pressure. You set a target pressure, but the actual pipeline may not be able to reach your set pressure. Goal pressure is like you have set a job goal, whether it can actually be completed, not necessarily. If you set the pressure too high and the power of the pump is not enough, you may never reach the target pressure.

The actual pressure is detected by a pressure sensor or a remote pressure gauge, and then told to the inverter. After the inverter receives the actual pressure data, it is compared with the target pressure. If the actual pressure is smaller than the target pressure, inside the inverter, after PID calculation, it will output an increasing frequency value. This frequency value is Corresponding to the speed of the water pump, at this time, the speed of the water pump will increase, and the actual pressure in the pipeline will also increase.

When the actual pressure is equal to the target pressure, the inverter's PID stops adjusting and maintains a constant frequency output. At this time, the pump speed is constant. When the water consumption decreases, if the speed of the water pump remains unchanged, the actual pressure of the pipeline will rise. After the frequency converter detects it, the speed of the water pump is reduced through PID adjustment.

Through PID adjustment, the frequency converter keeps the speed of the water pump dynamically changing, so that the actual pressure is always maintained at a stable value. In the whole process, no human involvement is required. All you have to do is to set the appropriate PID value. There are these 3 values in the parameters of the inverter. For example: Inovance MD380 inverter is in the FA group parameters (P86), these parameters will have default values when they leave the factory.

In many cases, the pipeline pressure is unstable, fluctuates relatively large, or the response is relatively slow, then we can optimize by setting the parameter values of these PIDs. There are many specific methods for setting PID parameters on the Internet, and there is no fixed formula to use. Generally, they rely on empirical values. The principle is that the response speed should be fast, the fluctuation should be small, and there will be no oscillations. This goal can be achieved. . This requires specific adjustments for specific occasions, and no set of parameters can satisfy all occasions.

The core principle of frequency conversion to achieve constant pressure water supply is actually a PID adjustment process.