NEMA 11 28MM GEARBOX STEPPING MOTOR-HOLRY

NegotiableUpdate on November 04

Model

Nature of the Manufacturer: Other

Product Category: Gearbox stepper motors

Place of Origin: City, Province

Online Consult Contact Information

Overview

General technical characteristics:1. The stepping motor is used in low-speed occasions---the speed does not exceed 1000 revolutions per minute, (6666PPS at 0.9 degrees), preferably between 1000-3000PPS (0.9 degrees), and it can be used here by a decelerating device. At this time, the motor has high working efficiency and low noise;2. The stepping motor is best not to use the full-step state, the vibration is large in the full-step state;3. The voltage value in the motor specification is not the driving voltage volt......

Product Details

product description

Technique Specification

Model	Step angel (°)	Motor Length L2(mm)	Rate Voltage (V)	Rate Current (A)	Phase Resistance (£2)	Phase Inductance (mH)	Holding Torque (Kg. cm)	Lead Wire (No.)	Motor Weight (kg)
28HB31F095AJ	1.8	31	0.95	2.8	2.3	0.6	0.6	9	110
28HB44F095AJ	1.8	44	0.95	4.7	3.7	0.9	0.9	12	140
28HB51F095AJ	1.8	51	0.95	5.6	5.0	1.1	1.2	18	180

Available reducer data

Reduction ratio		3.71,5.18	13.7,19.2,27,	51,71,99,139
Length LI	mm	31	41	51
Rated torque	Nm	0.4	0.4	0.4
Maximum load	Nm	0.6	0.6	0.6
Efficiency	%	90	81	73
Backlash	arcmin	<60	<75	<90